Оборудование для гипсовой

Описание и отзывы

Трекер стоимости

Характеристики

 

    Linyi Yuanteng Machinery Co.,Ltd was established in 1995,located in Linyi City,Shandong Province,China.Company has been engaged in designing and manufacturing construction machinery for many years,accumulating rich experience in equipment design, manufacturing,installation,commissioning and production. Exported to more than 15 countries such as: Laos, Uzbekistan, Russia, Oman, Ethiopia, etc.

   Welcome to visit our factory! Hope we can get a good and long cooperation!

 

Calcium silicate board production line brief introduction

1. Capacity: depends on customer’ reality

2.  Finished board

  Ceiling board also known as gypsum composite plate, is a multivariate material that is generally composed of natural gypsum powder, white cement, glue, and glass fiber. Silicon calcium plates have fire, moisture, sound insulation, heat insulation and other properties. They can attract water molecules in the air when the indoor air is wet, and when the air is dry, they can release water molecules, which can appropriately regulate the indoor dry, humidity, and increase comfort

Calcium silicon board is a new type of plate made of Silicon and calcium materials, which is made of pulp, molding, Steam raising, drying, sand light and post-processing. The products have the advantages of light and high strength, fire protection and insulation, and good processing.      They can be widely used in fire proof wall panels, ceiling panels, wind ducts, various vessel partitions, and fire doors for high-rise and public buildings.

(1) Composition structure
  The Silicon calcium plate is mainly composed of calcium silicate. It is made of siliceous materials(diatomite, bentonite, quartz powder, etc.), calcium materials, reinforced fibers, etc. as the main raw materials. After pulp, billet, steaming, surface sand and light and other processes. Light plate.
  Natural gypsum products are also special fire resistant materials. They can generate thermal absorption reactions in flames. At the same time, they release water molecules to prevent the fire from spreading. They will not decompose into any toxic, corrosive, suffocating gas, nor will they produce any. Incentive or flue gas.

(2) Calcium silicon board classification
1) Grade: premium, high-end, mid-range, low-grade
2) Stereo: flat edge, fall level
3) Surface: flat panel, pattern board, hollow board
4) Specifications: 595 * 595, 603 * 603, 1200 * 600, 300 * 300, 300 * 600
5) Commonly used thickness: 9, 12, 15, mm
  The board has light weight, high strength, moisture, corrosion prevention, fire protection, another notable feature is that it is easy to reprocess, unlike gypsum plate processing easy powder fragmentation.

(3) Comparison
  As a gypsum material, Calcium silicon board and gypsum board compared to the appearance of the paper gypsum board retain the beauty of the paper gypsum board; The weight is much lower than the paper gypsum board, and the strength is much higher than the paper gypsum board; It completely changed the fatal weakness of gypsum board deformation due to moisture, and extended the service life of the material several times; In terms of sound absorption and thermal insulation, it is also improved compared to gypsum plates, but it is lower than the ceiling of rock cotton. In terms of fire protection, it is also better than mineral and paper gypsum boards, but lower than rock cotton boards.
  At the same time, Silicon calcium board and calcium silicate board are also two different materials. The first is to say that Silicon calcium boards are mainly composed of gypsum, and calcium silicate is composed of quartz, mica, and wood fibers. The second is the use: Silicon calcium plate can be used for indoor ceiling, and it also has the difference of high-end, mid-range, low-grade, the best is high-grade solid Silicon calcium plate, moisture resistance, fire resistance, anti-fouling, low-carbon, clean surface, durability is good. The calcium silicate plate can be used for indoor and outdoor walls, ceiling, surface decoration, firewalls, fireproof ceiling, steel structure, high temperature insulation and many other environments. The calcium silicate plate is also good or bad. Asbestos, harmless to the human body, Poor raw materials are very bad, containing asbestos, carcinogenic, not recommended for large areas of use.

3. Process

  The raw materials for the production of Silicon calcium plates are of a wide range of sources. Silicon materials can be used for quartz sand, plate, fly ash, sand dust, porcelain clay, etc.. Calcareous materials can be used for raw lime powder, lime paste, calcareous powder, electroscopic mud, etc.. The reinforced materials can be made of glass fiber, mica powder, cellulose, organic synthetic fiber and asbestos fiber. The process methods for producing Silicon calcium plates are die pressing, copying and flow pulp.

 

 

4. After-sell service

(1). We offer technical support until the workers know how to operate.

(2). We offer the technology data and relative files of gypsum powder production line.

  The operating instruction will go to the customers with the equipment.

(3). We provide free answers for all kinds of questions about the production line.

(4). We provide lifelong guidance of above equipment.Visit client in regular times.

(5). Excellent easy-broken parts support for buyers. Easy-broken parts guarantee for one year.One year guarantee for whole production line

(6). We can help the customer to do the consignment and the relevant procedure for import and export.

5. Payment: TT or LC

6. Some pictures about the production line