This is a professionally built brand new flash dryer With Temperature Display. It has a 16“x16" heating grid opening, wheels, and a standard 110v or 220V plug so there is no special wiring required. This unit can be raised or lowered from 30" to 48". It is very heavy duty. The temperature is over 400 degrees F at distance of 2 1/2" below the flash heating element. It can easily cure plastisol ink for silkscreen printing.

The unit is ultra heavy. It has a base diameter that is reasonable (about 38"). It can easily roll thru standard 32" door way.  We have a Ranar flash dryer. It is only about 2/3 the weight. It is much lighter so its base has to have a big diameter (over 50") to prevent it from tipping over. (see photo above ) This create quite a bit of inconvenience because we keep on tripping or kicking the Ranar flash unit while we are working on silk screen printing. This flash dryer base is compact and it will not tip over because it is heavy.

Application:It can easily cure plastisol ink for silkscreen printing,widely used in home offices and presses which leading the paper era.

Note:We normally sell this unit for $299. But for ebay and ebay only, we are selling it at deep discount. (In store pricing will be $299)

Stop curing shirts with a heat gun or an oven, get this flash and start doing things the right way. This is a free standing FLASH dryer. This dryer can be used to flash dry your prints or process the final curing of your garments.

Notice the fusing fuse in a long time continuous period,rest for cool,and check it regularly.Reserve properly,for electrical components is attractive to dust.Clean it's platform regularly before use and after.This item takes approximately 5 minutes from initial turn on to stabilize temperature. There will be natural fluctuations in the temperature as you use the item.