Термопластичная дорожная маркировочная машина для распыления краски на

Hand-push Thermoplastic road marking machine adopt single-handle marking shoe. It has advantage of easy using and hard to slip paint out. The glass beads spreader complete with speed control buffer devices and can change the width of glass beads according with needing.

The positioner upon back wheel make sure the machine go straight. This machine has the advantage of high-quality construction, fast , flexible operation, convenient maintenance and so on. It can be suitable for highway, municipal roads, village or town road, guiding arrows, words, parking lines, factories etc.

1.Hand-driven chain drives impellers to agitate melting materials, being light and handy in operation.

2.Specialized mid-pressure furnace is equipped for industrial use, which has high thermal efficiency and fast melting

3.The unique controllable switch valve of the fire road can let the operator observe the situation of the spit fire and adjust the controller of the fire road and the flame. Thus make the marking work safer and more efficient.

4.Two movable extraction stacks discharge exhaust gas in time to maintain good working environment.

5.Triple-layered removable covers make it convenient to clean the kettle and change melting materials in different colors

 Thermoplastic Road Marking Machine Paint Spraying For Sale Australia

Thermoplastic Road Marking Machine Paint Spraying For Sale Australia

1.Equipped with petroleum gas fuel providing enough power for heating of materals

2.100kg mixing drum which is made bu insulation material and manual mixing.

3. The marking hopper is made of high-precision cast iron,Which can make the marking line,Orderline,Uniform thickness as wellas width(50mm-500mm) is optional.

 Thermoplastic Road Marking Machine Paint Spraying For Sale Australia

1. Dash national standard thickness: 1.2-2.5 mm, the thickness of the scribe line is adjustable.
Thermoplastic Road Marking Machine Paint Spraying For Sale Australia
2. Same effect as split hot melt scribing
Thermoplastic Road Marking Machine Paint Spraying For Sale Australia
3. Heating time is about 30 minutes

4. Standard batching bucket: 15cm, we can choose one hopper at the factory

5. The glass beads can be placed in the hot melt coating or separately.

Regarding the problem of the base oil,

a. Cement pavement marking must first use the base oil, old asphalt pavement, new asphalt pavement is not required.
b. Proportion of paint and base oil, 30:1 (1 ton of base oil for 30 tons of paint)