Усилитель сотового телефона LTe 4g ретранслятор однодиапазонный сигнала сотовый Gsm усилитель мобильного для звонков и

Описание и отзывы

Трекер стоимости

Характеристики

Newest Model 27 dBm LTE 2600MHz  4G Cell Phone Signal Booster Mobile Phone Repeater For Office

Model: GW-27L

 

 

The LCD Repeaters  is a newly designed solution with intelligent functions. It is the perfect solution for providing a wireless improvement in the cellular reception of a home, office, restaurant, building or shopping mall. The covering area is ranging from 300 to 1000 square meters.

 

The LCD Repeater covers all existing wireless public communications networks: 

LTE 2600MHz. 

 

The LCD Repeaters have many intelligent functions: such as antenna isolation detection, Input & Output signal strength indication, system indication, manual gain control and smart mode. See the detailed introduction listed below:

       The Display will auto off if don't touch it in one minute.

 

1. “GREETWIN”is Company LOGO.

2. Power: Power supply with indicator.

3. Smart: Smart function with indicator. AUTO Mode now.

4. M :  “AUTO” switch to “MANU”.

5. Sel: Select the working systems ,

long press the button for 2s , will enter into 900M. then setting the gain.

then set the gain 65dB, long press the button for 2s again. 65dB was confirmed.

6. 900MHz: Show the current working system. Press “Sel” to change to the different system for operation.

7. AUTO/MANU: Automatic Mode or Manual gain Mode.

8. AGC: Automatic gain control with indicator.

9. ISO: Isolation inspection with indicator.

10. 63dB/68dB:  gain of the working system.

11. 0dBm/0dBm: outpower of the working system.

12. UL is Uplink, DL is downlink. “+” is increasing the gain, “-” is decreasing the gain.

 

3. Manual Gain Adjustment. The users or engineers could reduce the gain of the repeater manually via the buttons below the screen. The uplink and downlink gain could be set independently. “+” is increasing the gain, “-” is decreasing the gain.

 

4. Automatic Gain Control. Automatic Gain Control (AGC) is a dynamic gain adjustment feature with 31dB range.

 

5.Smart Mode = AUTO Mode. The repeater could automatically change the gain according to the specific environment when the smart function is on. Please note that when the SMART is on, users could not able to set the gain manually. Gain reduce 31dB automatically at first, then AGC Alarm RED when AGC control 5dB-10dB, ISO Alarm RED when AGC control 20dB-25dB, Repeater will Auto Shut Down. Auto restart after two minutes.

 

6. MANU Mode, users can set the gain manually. AGC Alarm RED when AGC control 5dB-10dB ;

ISO Alarm RED when AGC control 20dB-25dB, Repeater will Auto Shut Down. 

Auto restart after two minutes.

 

7. Auto Shut Down = ISO. Auto Shut Down is a stage that temporarily stops the RF function. If the input power reduces to a safe range for the repeater to operate, the software would power the repeater back on and restore all functions promptly. However, if the input power remains too great and dangerous for the network, it will then shut down completely. In such case, the signal is too strong for the usage of the repeater.

 

 

1) Donor antenna: Recommend to use wide band panel antenna (7~14dBi gain) or Yagi antenna, better to use antenna with good direction, high gain, and decoration shall be considered if it is in urban areas.

 

2) Role: It picks up signals from the tower, and sends to the booster through cables, at the same time, it transmits the amplified mobile signals from the booster to the tower.

 

3) Server antenna: Recommend to use indoor omni or panel antenna. Indoor omni is suitable for wide open areas where the signals can be radiated from the center to the surroundings, while indoor panel is suitable for those narrow and long areas, like tunnels, corridors, elevators, etc.

 

4) Cables: 5D-FB or 7D-FB coaxial cables.

 

5) Power supply: Booster power adapter, a desktop standard. Usually directly connected to a power outlet. But preferably equipped with an air switch, groundings, sometimes a surge arrestor shall be connected.

 

Specification		Uplink	Downlink
Frequency	LTE 2600MHz	2500 ~ 2570MHz	2620 ~ 2690MHz
Operation Bandwidth		Wide Band
Gain		≥75dB	≥80dB
Output Power		≥23dBm	≥27dBm
MGC (Manual Gain Control)		31dB Range/1dB step
Ripple in Band		8dB
Noise Figure		≤ 6dB
VSWR		≤2.0
Automatic Level Control		≥20dB
Intermodulation Products		≤ -40dBc
Spurious Emission	9KHz~1GHz	≤ -36dBm/30KHz
	1GHz~12.75GHz	≤ -30dBm/30KHz
Frequency stability		≤ 0.01ppm
MTBF		> 50000 hours
Time Delay		≤1.5μs
Impedance		50Ω
Power Supply		Input: AC 110~240V; Output: DC 9V/5A
LED Alarm	Power LED	DC ON/OFF
	Smart LED	Smart function ON/OFF
AGC Alarm		Alarm RED when ALC 5dB-10dB
ISO Alarm		Alarm RED when ALC 20dB-25dB, Then Repeater will Auto Shut Down. Auto restart after two minutes.
Mechanical Specification
RF Connector		N-Female
Power Consumption		25W
Operating Temperature		-10℃~ +55℃
Environment Conditions		IP40(Indoor)
Installation Type		Wall Installation
Dimensions (D x W x H )		228*170*65mm
Weight		≤ 3.5 KG