Промышленная печь на биомассе древесные чипы оборудование для сушки опилок вращающаяся барабанная

Main data of the sawdust rotary dryer equipments:

Introduction:

Our sawdust rotary dryer equipments is your best choice for high capacity applicatinos incolcing high moisture, friable, free-flowing commodity products and by-products. Shows the features of perfect, easy operation, our sawdust rotary dryer equipments is special designed to dry the wood material which combines the function of drying and cooling, so it can save 30-50% energy.

working principle:

1.In this system ,wet raw material is input into hopper by screw feeder. Then the large volum of hot air produced by the fuel furnace mixed with the wet powder in the rotary drum and moved through drying chamber by the power of fan blower.
2.As the material travels along the rotary drum, it keeps the suspending state together with the fast moving hot air and moisture and is rendered dry at the discharge end .humid air is continuously exhausted, thus the material is dried.

Advantages:

1. The sawdust dryer have high degree of mechanization, large production capacity and continuous working;
2.With simple and excellent structure, the material running smoothly inside the sawdust dryer cylinder;
3.The sawdust dryer with less mechanical failure, low maintenance and low power consumption;
4.The dryer work uniformly and the drying product is very good;
5.With complete dust removal equipment and protect the environmental;
6. Sawdust dryer with no dust spilling;
7.Easy to operate and have a good operating environment.

The feature of the dryer:
1. In hot air stream 95% to 98% of moisture can be evaporated immediately;
2. Quick drying speed: the surface area of material liquid through atomizing is increased greatly;
3. Product has good uniformity, fluidity, solubility, high pure and quality;
4. For liquid containing 0-60% of damp(special may be 90%). It can be dried to powder through drying one time;
5. After dried, not necessary to crush, sieve therefore reducing productive procedure;
6. For the size, bulk density and moisture of product can be adjusted within certain scope through exchanging operation condition;
7. Large flexibility of operation
8. No high requirement for factory buildings.