Шлифовальная полировальная машина с алюминиевым

JT-2 Dished End & Tank Head Polishing Machine

This machine is suitable for all kinds of standard heat polishing,conical head          polishing,spherical head      polishing,torispherical head      polishing,industrial pressure head polishing,deformed head polishing, stainless steel elliptical head polishing and stainless steel sealing head inside & outside surface polishing.The dish head polishing machine is extensive apply for the polishing of work piece in the range of medical, chemical, environmental purification, food and beverage, water filtration etc.

1. Preset parameters
According to the curve of the inner and outer surfaces of the head, it is roughly divided into three sections, namely, segmentation, time division, and speed control. The running time of each section of the beam is directly adjusted on the three time controllers of the control cabinet. Corresponding to the speed control of the inverter. During the polishing process, the running track of the grinding head is consistent with the surface of the head. Combined with the grinding head floating technology, the grinding head is closely attached to the surface of the workpiece during the polishing process, and is evenly ground for batch polishing. 

2. Panel direct control
The beam travels in a predetermined direction. The beam travels up and down and left and right according to the actual adjustment of the panel. Combined with the grinding head floating technology, the grinding head is closely attached to the surface of the workpiece during the polishing process, and is evenly ground for a small amount of workpiece polishing.