Гранулятор нитей холодной резки для полимерного

Описание и отзывы

Трекер стоимости

Характеристики

 

 

It is strand pelletizing (cold cut): melt coming from a die head is converted into strands that are cut into pellets after cooling and solidification.

 

A line utilizing a simple water bath for strand cooling often is the first option for compounding plants. However, the individual layout can vary significantly, due to the demands of throughput, flexibility, and degree of system integration. In strand pelletizing, polymer strands exit the die head and are transported through a water bath and cooled. After the strands leave the water bath, the residual water is wiped from the surface by means of a suction air knife. The dried and solidified strands are transported to the pelletizer, being pulled into the cutting chamber by the feed section at a constant line speed. In the pelletizer, strands are cut between a rotor and a bed knife into roughly cylindrical pellets. These can be subjected to post-treatment like classifying, additional cooling, and drying, plus conveying.

 

Granulator is for compounding extrusion and glass fiber reinforced water-cooled granulation system.

It can be independently used to make various Plastic Cold brace and Fiberglass, such as, polyolefin’s, engineering plastics, and PP, PBT, PET into granules. It revolves slowly and so its noise is low. Besides, its granules are neat. Compared with similar products, power consumption reduces 30%, so it greatly saves energy.

The machine has a constant power, ensuring that it works at any speed, which can greatly reduce the unnecessary waste of precious raw materials.

 

SPECIFICATION

name	model number
	LQ-25	LQ-60	LQ-100	LQ-200	LQ-300	LQ-400	LQ-500	LQ-600	LQ-900
Maximum output Kg/h	25	60	100	200	300	400	500	600	900
Input number strip	3	4	6	12	15	25	25	32	42
The size of a granule (mm)	φ3×3
Electrical machinery power (KW)	0.75	1.1	1.5	3	3	4	5.5	7.5	11