Сертификат CE Крытый/Открытый водонепроницаемый пульт дистанционного управления анти-ржавчины Автоматическая блокировка при парковке с

Easy to Use
Touch the remoter to lower your automatic parking lock to lay flat, then drive your vehicle into parking space; When leaving, touch the remote, and your parking lock will automatically rise up to prevent anyone else from using your parking space.

Easy to Install
Fix parking lock onto the ground by expansion bolts, that is all!

Rechargeable Battery with Long Continuous Use
Your parking lock is powered by a rechargeable battery. After being recharged, it will lasts for about 1000 uses, or about 6 months continuous use. Your parking lock comes with a recharging power pack.

Heavy Duty and Durable
The housing adopts high quality steel rolling which can bear Max. 5 ton weight. With spray plastic coating, the housing is waterproof, rustproof and dustp-roof enough to last about 5 years in hard weather. The sway arm made of steel rolling won`t deform even it is crushed by a vehicle.

Well Performance in Water and Dust
The parking lock is water-proof and dust-proof which make it suitable for various parking environments. It is even working fine in the water for couples of hours.

Burgla-proof for safety
The expansion bolts are placed inside the housing of parking lock, can`t be removed without a key of the housing. In case someone tries to remove it without permission, the parking lock will alarm loudly to remind its owner and also scares the thief.

Auto-reposition
In case a vehicle hit the parking lock from its front side, the sway arm will be forced to close down with alarm sound, and once the vehicle left the sway arm will automatically raise up till vertical. With the remoter, you can even hold position of sway arm when it was hit by a vehicle.

180 Degree Anti-collision
In case a vehicle hit the parking lock from its front side, the sway arm will be forced to close down with alarm sound, this will protect both vehicle and the parking lock.

Anti-disconnecting for Power Safety
The power connection is anti-disconnecting design in case the use misplace the battery causing short circuit

Alarm Against a Hit
In case a vehicle hit it, the parking lock will alarm loudly to remind the driver.

Noise-free
The transmission design on motor makes almost zero noise, which is good for battery and motor longevity and less friction, also goods for quiet environment.

Manual control in case of no power
In case the power is off, just manually control the parking lock in emergency.

Alarm Against a Low Battery
If the battery is low, the parking lock will alarm to remind the owner to recharge the battery.

Installation Position
Do not touch the parking lock when the automobile is going in and out of the parking lock. The parking lock is suggested to be installed in the middle of parking lock entrance.

Installation Site
The lock is required to be installed on level and dry cement ground.

Installation Method
A. Rotate the worm with manual crank to raise the rocker, open the lock with key. Open uper cover to install the lock
B. Drill three holes (12mm of diameter and 50mm of depth) and install M8 expansion bolts according to the locations of three installation holes on the parking lock foundation.
C. Cover three foundation spacers on the expansion bolts. and then cover parking lock foundation. install and tighten the bolts to finish installation.
D. When using the lock, open the upper cover and insert the battery plug to the parking lot socket.Then set the battery level.
E. Install the upper cover. Keep the upper and lower fixed blocks joggling (Hold the back of upper cover to push forward. as indicated in the schematic ),the lock the upper cover.