Машина для выдувного формования ПЭТ бутылок с маслом 1 5

1.5L PET oil bottle blow moulding machine factory

FP-1200N type is suitable for 1.5L PET oil bottle blow moulding machine factory. It has 2 cavity. It can blow bottles in shapes: Carbonated, mineral, pesticide, cosmetics, wide-mouth, hot filling, and other packing containers, which is made of plastic of crystalline type.

Features
1.\tPerfect function with economic investment.
2.\tSaving power and uneasy to worn out, Adopting new double crank four bars to lock mould, the cross fixed. Providing high pressure blowing system.
3.\tNo contamination and low noise with the air cylinder to drive the action instead of the oil pump.
4.\tSatisfaction with different atmospheric pressure for blowing and mechanical action by dividing the blowing and action into three parts in the air pressure diagram of the machine. 
5.\tStrong clamping force with high pressure and double crank links to lock the mold. 
6.\tSafe, reliable, and unique design of the position of valve to make the air pressure diagram of the machine easier to understand. 
7.\tLow cost, high efficiency, easy operation, easy maintenance, etc.
8.\tIdeal effect of the chilling with the chilling system.
9.\tEasy to operate and maitain.
10.\tAdopting double crank to adjust mould, heavy locking mould, stable and fast, adopting infrared oven to heat the perform, the perform rotated and heated equally.
11.\tThe air system has been divided into two parts: pneumatic action part and bottle blow part to meet the different requirements for the action and blow. It can provide sufficient and steady high pressure for blowing large irregular shaped bottles.
12.\tThe machine is also equipped with muffler and oiling system to lubricate the mechanical part of the machine.
13.\tThe machine can be operated in the step-by-step mode and the semi-auto mode.
14.\tThe machine is small with low investment, easy and safe to operate.
15.\tThe bottle rejection rate is less than 0.2%.

1. Installation & adjustment
After the equipment are arrived at the customer's site, the customer is responsible for unpacking and arranging the equipment according to the placement drawing; and does under our install-adjust technicians' guidance. Costs of the staff are decided at last.

2. Training
1). We are responsible for offering the technical training to user. The training content includes the structure and maintenance of the equipment, control and operation of the equipment. Through training, users'technical staff can grasp and the skill of operation and maintenance proficiently, and deal with the general troubles in time. We will appoint qualified technical staff for the guidance.
2). The buyer can send staff to our company for learning.

3. Quality assurance
1). We guarantee the goods offered are brand-new, not used, with latest design and suitable material made, and we guarantee the specification of the equipment is consonance with the contract.
2). We guarantee the line achieve product technical performance indicators within 5 days after feeding operation through the correct guidance of the installation and commissioning.
3). We are responsible for the fault and damage of the production line caused by our design, technology, manufacture, installation, adjustment and material defect etc. that all belong to our responsibility.
4). The warranty period is 12 months after acceptance check of the production line. If there is any different between the furnished equipment in the customer's factory and the equipment concerned in the contract, the users have the right to pass the inspection book to the legal department to claim for compensation to our company within goods warranty period.

4. Warranty
Offer 12 months maintenance period to the problem that caused by our design, manufacture and the material quality, and offer the relevant parts and effective service for free for above reason. We will offer a widely and favorable technical support, after service all the time after guarantee period.

ZhangJiaGang City FILL-PACK Machinery Co.,Ltd. is loacated in Zhangjiagang city which is famous for beverage machinery producer collection. Intergrated the industry advantange and its own development in R&D, production, sales, after sales service, FILL-PACK is ready to serve more and more customers with our full range products and satified service.
The product is very critical in the choice of raw materials and spare parts. Korea 304 \\ 316 stainless steel plate, ABB, SEW motors, Siemens, Mitsubishi, OMRON electrical control components, FESTO CAMOZZ the control valve, as well as international precision machining center for the fine quality of the machine foundation.
At present FILL-PACK have DY-1200A, DY-1200B, DY-500, DY-500II, DY-120, DY-1200N series of semi automatic blow molding machines.

Semi automatic bottle blowing machine can blow plastic bottles for water, oil, juice, carbonated drinks and etc. System is composed with blower, preform heater, air compressor, air chiller, air filter as well mould chiller, etc. Blower divided into 1 cavity, 2 cavity as well 4 cavity. Preform heater and blower can be chosen for different bottle volumes, such as 500ml, 1500ml, 1800ml, 2L, 2.5L, 5L, 20L blowing bottles. It is widely used to produce water bottles, oil bottles, carbonated bottles, water or oil gallon bottles. Stable performance with advanced PLC, and operate the whole machine easily. We can adjust the heating temperature and blowing time etc according to customers' different preform and bottle shape.
Our products pass quality inspection executed by Bureau of Quality and Technical Supervision every year. Our factory is in accordance with ISO9001: 2000 certification system standards and we gain CE certificate for exportation to Euro countries. Our machineries are sold to more than 30 cities in China and over cross to American, Spanish, Hungary, middle east and African countries. 
We help to set up your factory as our own home with our pure heart, we do to service, we learn to support!