9808 + RuoShui Цифровой мультиметр 2000 мкФ постоянной ёмкости универсальный конденсатор 20 МГц Частота Температура индуктивность 1000V 20A

This series meter meets the standard of IEC61010 (the safety standards request issued by IEC or equal GB4793.1 standards). Please
read below notes carefully before operation.3-1.Input of limit values beyond range is prohibited.3-2.The voltagewhich isless than
36V is a safety voltage. When measuring voltage higher than DC 36V, AC 25V, check the connection and insulation of test leads to
avoid electric shock.3-3.Be sure to keep the test leads off the testing point when converting function and range.3-4.Select
correct function and range to avoid fault operation.3-5.When the battery is not installed and the back cover is not tightened,
please do not use this table for testing;3-6.When you measuring resistance, capacitor, diode, temperature and on-off test, do not
input voltage signal;3-7.Before replacing the battery or fuse, remove the testleadsfrom the test point and turn off the power
switch;3-8.Comply with local and national safety regulations, wear personal protectiveequipment (approved rubber gloves, masks and
flame retardant clothing, etc.), to prevent electric shock and arc injury caused by exposure of
dangerouselectricconductor.3-9.Make measurements using only the correct measurement standard class (CAT), voltage and current
rated probe, test conductor and adapter.3-10.Safety symbols“” exists high voltage,“”GND,“” dual insulation,“” must refer to
manual,“” low battery