Гибочные станки гибочный станок для арматуры стальных стержней

Описание и отзывы

Трекер стоимости

Характеристики

Introduction & Advantage:

The mini rebar stirrup bender machine is mainly composed of four parts: transmission mechanism, frame, bending and bending fixture and electrical control. During operation, the motor drives the gear through the V-belt and the pulley, and then the gear rotates the working disc.   

1. Service life is prolonged with high-strength gears and high-frequency heat treatment of spline shaft.

2. Spindle bearing is sealed by double-layer seals (bearing seal, upper shaft seat seal) to prevent iron oxide entering the bearing during work.

3. High-frequency heat treatment is adopted in spindle to enhance toughness.

4. Sturdy skid type baffle plate to reduce bending load of the motor effectively.

5. Semi-circular tooth is adopted for the main shaft gear to ensure that there is no winding phenomenon during bending process.

 

Technical Parameters
Model	FHG-20	FHG-20C	FHG-25C	FHG-25	FHG32P
Bending diameter	Grade III ribbed bar≤16mm; Ordinary carbon steel≤18mm	Grade III ribbed bar≤16mm; Ordinary carbon steel≤18mm	Grade III ribbed bar≤25mm; Ordinary carbon steel≤25mm	Grade III ribbed bar≤25mm; Ordinary carbon steel≤28mm	Grade III ribbed bar 4~28mm; Round steel 4~32mm
Voltage	380V, 3phases, 50Hz
Motor power	2.2KW-2	2.2KW-2	3KW-2	3KW-2	4KW-P
Weight	130kg	103kg	172kg	230kg	245Kg
Dimension	830*540*890mm	740*550*880mm	930*650*860mm	960*680*900mm	/
Pictures