Полностью автоматические пресс-машины для брикетирования Сенного Куба

1. Introduction: 
This machine is used for making cube biomass briquette from the sawdust, straw, hulls, etc. 
(1) Multi-function design: Can extrude pellets or briquette, briquette diameter can be 50-100mm adjustment. Pellet diameter can be 4-12mm, briquette diameter can be 20-33mm. 
(2) Output forming steady: Mechanical ramjet design, used high temperature high pressure RAM principle to adjust pressure angel, make material output without block; 
(3) Long machine life time: Use alloy steel, vacuum firing craft, improve die life time; 
(4) High capacity: Can operate 24 hours continuously; 
(5)High density: Adopt mechanical RAM design, forming principle is high temperature, high pressure, high frequency, make high density, between 1.0-1.3 g/cm3. 
(6) Easy operation: High automatic degree, little labor force; The whole machine is matched feeder and output conveyor, and control box; 
(7) Proper for a lot of material: All kinds of straws, grain husk, peanut hull, cotton straw, sawdust, branch, life waste and so on. 
(8)Length of Raw Materials should be below 50mm, if not, you need a crusher. 
(9)Moisture Content of Raw materials should be below 25%, If much larger, drying by the sun or drier first please. 

2. Main date 

3.More picture

The rotary roller system makes the feeding continuous and uniform

Rotating support makes the turntable run more smoothly

The turntable reducer provides greater torque

Alloy steel dies are more durable

Special heat treatment of the gear wheel to reduce the number of replacement

Final product sample: hay alfalfa grass square

9CK-120

9CK-160

9CK-250

9CK-400

 Package:In wooden box

Shipping:By sea