Изготовителя пятно мелтблаун материал посвященный индекса расплава

Product description:

The melt index meter conforms to the standard requirements of GB / T3682-2000. The main parameters of the melt index meter are also full of ISO1133-97, ASTM1238, JIS and other standards. It can be used for polyethylene, polystyrene, polystyrene, ABS, poly Melt mass flow rate (MFR) or melt volume flow rate (MVR) of various plastic materials such as amides, fiber resins, acrylates, polyoxymethylene, fluoroplastics, polycarbonates, etc., is widely used in plastic production , Plastic products, petrochemical and other industries, as well as related colleges, scientific research units and commodity inspection departments.

Features:

1. High-precision Chinese and English color controllers and special customized membrane keys have unparalleled advantages in control accuracy and service life

2. Manual automatic cutting control, accurate to 0.1s, and the cutting time and cutting times can be set arbitrarily.

3. Built-in micro printer, can print test data

4. Dual temperature control system, using dual imported heating ring, dual imported PT100 platinum resistance sensor, improve test accuracy and temperature stability.

5. Add displacement sensor to test MVR (volume method) with an accuracy of 0.01mm.

6. Volumetric test can be output directly without cutting

7. The density value of the material at a specific temperature can be calculated by the ratio of the volumetric mass method

8. It can be connected to the computer via USB, and the test conditions can be set on the computer through the software, the data is printed, and the data is stored (optional).

Test method:

Mass method, volume method (MFR, MVR)

Display method:

English color LCD display

The main technical parameters:

1. Temperature range: 0 ℃ -450 ℃

2. Temperature fluctuation: ± 0.2 ℃

3. Temperature uniformity: ± 1 ℃

4. Temperature display resolution: 0.1 ℃

5. Time display resolution: 0.1S

6. Die diameter: Φ2.095 ± 0.005mm / Φ1.05mm ± 0.005mm (standard two)

7. Outlet length: 8.000 ± 0.025mm

8. Loading barrel diameter: Φ9.550 ± 0.025mm

9. Weight accuracy: ± 0.5%

10. Displacement measurement accuracy: 0.01mm

11. Timing accuracy of volume method: 0.01S

12. Displacement measurement encoder: Omron photoelectric rotary encoder

13. Test range of quality method: 0.1-150g / 10min

14. Volume method test range: 50-5000cm3 / 10min (up to 5000 cm3 / 10min can be measured by means of plugging die)

15. Output method: micro automatic printout

16. Cutting method: manual and automatic cutting

17. Test load: 8 levels, 8 sets of weights

18. Power supply voltage: AC220V ± 10% 50HZ

List of melt index accessories: