Output power, 1 kHz, 0.1% clipping
8 Ω dual channel drive 700W
4 Ω dual channel drive 900W
Signal to noise (20 Hz - 20 kHz) 100 dB
Input sensitivity 1.2vrms
Voltage gain (8 Ω) 32.2 DB
Output circuit level B
Power requirements (1 / 8 power, pink noise 6.3A 6a 11.5a at 4 Ω 220 V AC)
Distortion (less than 1 dB, 1 kHz) 8 Ω, less than 0.02%
4 Ω, less than 0.05%
Frequency response 20 - 20kHz, + 0, - 1dB
Dynamic clearance, 4 Ω 2dB
Input impedance over 20K ohms (balanced or unbalanced)
Maximum input level + 6 dB
Input connector, 3-pin XLR for each channel, balanced, parallel
Output connector, speakon of each channel, terminal
Amplifier and load protection short circuit, open circuit, thermal RF protection, load protection for DC fault
The power rating of this series matches the most commonly used loudspeakers in the entertainment industry.
Maximum real headroom optimization for loudspeaker systems with loads of 4 Ω and 8 Ω.
Input: XLR, 1 / 4, TRS socket, compatible with any source.
Output: speakon combo speakon 2-pillar and 4-pillar plugs (2-pillar only). The terminals support all other speaker cabling systems.
The intelligent protector automatically protects the amplifier and loudspeaker from damage caused by temperature rise or overpressure without shutting down the playback.
The front panel LED monitors power, signal and clipping.
Subwoofer / satellite frequency divider built in.