Контейнер для жидкой каустической соды 20 футов стандарт

Frame Dimensions (L x W x H)

6058 x 2438 x 2591 mm

Nominal Capacity

21000 litre (±0.75%)

Maximum Gross Mass

36000 kgs

Tare Mass 

3510 kg (± 3%)

Design Temperature (Frame & Tank)

-40 to +130 °C

Pressure

Working 

1.70 bar 

Test

2.65 bar

Material

Tank (Shell & Ends) 

SANS 50028-7 Type 1.4402/1.4404 (C≤0.03%)

Frame

SPA-H or equivalent

Insulation

Shell

Rockwool (50kg/m3) 50mm thick on aluminium foil.

Ends

Glasswool (16kg/m3) thickness to suit on aluminium foil.

Steam Heating

6 runs.
110mm width stainless steel 304.
1" BSP inlet, 1" BSP outlet both with captive caps and cable.
4 bar working pressure, 6 bar test with warning decals and markings.
A condensate drain is fitted.

Manhole

500mm low profile, 8 point fixing with Super Tanktyt Lid seal.

Safety Relief
Assembly

1-off.
2½" BSP Supermaxi Highflow relive, without flameproof gauze.
Pressure only set at +4.4 bar (63.8psi).
The assembly is situated off centre on a tangential tank pad.

Air Inlet

assembly

DN 40 ball valve terminating with 1½" BSP connection and cap.
The assembly is situated off centre on a tangential tank pad.

Top Discharge

DN80 stainless steel 316 tank pad with a blind flange.
The assembly is fitted on centre on a horizontal tank pad.

Bottom
Discharge

DN80 45° Univalve Internal Footvalve part no. TBC fitted with an integrated butterfly
valve terminating with a 3" BSP spigot with 3" BSP blind cap and chain.

Thermometer

A surface mounted analogue type is fitted to the rear end dished end of the tank. Dual
scale -40°C to +160°C / -40°F to 320°F. The thermometer is fitted with a protection bar.

Document
holder

A clear plastic document holder ø110mm is fitted to the rear right hand side beam.
A drain hole is provided at the lowest point.

Calibration

A calibration plate marked in cm/litres is fitted on the spillbox side wall.
No calibrated stainless steel grade dipstick and bracket fitted.