Битум 60/70 упакован в стальной барабан jumbo bag и насыпью цистерной резервуаром ISO поставляется CNF из любого

Описание и отзывы

Трекер стоимости

Характеристики

bitumen 60/70

basekim bitumen penetration grade 60/70 is semi hard penetration grade bitumen using as paving grade bitumen suitable for road construction and repair also for the production of asphalt pavements with below technical specification. This grade of bitumen is mainly used in the manufacture of hot mix asphalt for bases and wearing courses.Bitumen 60/70 is most used bitumen grade and basic material for all other bitumenious products.

What is bitumen 60/70?

Bitumen 60/70 has the highest-boiling point, heaviest and most polar fraction from the vacuum distillation of crude oil. Bitumen 60 70 is composed of asphaltene and maltene. The heavy insoluble asphaltene molecules give bitumen 60/70 its body and softening point while the maltenes are oily and make asphalt flexible. Asphaltene molecules are soluble in aromatic solvents like toluene but insoluble in heptane. The maltenes are heptane-soluble molecules and less aromatic.  

Softening point and penetration of bitumen 60/70

Penetration grade bitumen supplied by ATDM is pure petroleum grade bitumen, manufactured from vacuum bottom by passing hot air. The bitumen supplied by ATDM is produced from remain of crude oil after cracking and removing hydrocarbon. Penetration grade bitumen 60/70 has penetration between 60~70 desi-millimeter and softening point between 48 ~ 52C. The penetration grade bitumen 60/70 has a thermoplastic property which is like as synthetic resin material which gets softer with heating and hardens when cooled. This grade of bitumen 60/70 has very strong viscosity compare to other grades.

Guaranty/warranty of bitumen 60/70

ATDM guaranty the quality of bitumen 60/70 with arrangement of international inspector to check quality and quantity of the bitumen during the loading to vessel and controlling the production by QC by batch test report before shipping. ATDM guaranty the quality to meet with ASTM/EN 12591.

Packing of bitumen 60/70

It is 180 (+/-2.5) Kg New Steel Drum, Original Package, 0.6 mm thickness of Drum // Each 20” FCL: 110 Drums

Specification of penetration bitumen 60/70

Bitumen 60/70	Specification	Test method
Specific gravity @ 25/25 cg	1.01/1.06	D-70
Penetration @ 25 c	70/60	D-5
Softening point c	48/52	D-36
Ductility @25 c	100 min	D-113
Loss on heating(wt) %	0.2 Max	D-6
Drop in penetration after heating %	20 Max	D-6 D-5
Flash point c	250 min	D-92
Solubility is CS2(wt) %	99.5 Max	D-4
Spot test	negative	A.A.S.H.O.T102