Unilin Click ПВХ пластиковый настил 6 0 мм виниловые доски роскошный

SPC floor is made of calcium powder as the main raw material. Extruding sheets after high-temperature plasticized, coating color film decorative layer and wear-resistant layer by four-roll calendering, treated with water-cooled UV coating paint production line, SPC floor does not contain heavy metal formaldehyde with harmful substances, it's 100% formaldehyde-free environmentally friendly flooring.

1.The main raw material of SPC flooring is PVC,PVC is an environmentally friendly non-toxic renewable resource.It has been used in daily life, such as tableware, medical infusion bags and so on, so there is no need to worry about the environmental protection.The main component of SPC floor is natural stone powder, which is tested by the national authoritative department and does not contain any radioactive elements.It is a new type of eco friendly flooring material.Any qualified SPC floor requires IS09000 international quality system certification and ISO14001 international green certification, up to EN14372, EN649-2011, IEC62321, GB4085-83 standards. 
2.SPC flooring is recyclable,greatly saving wood usage.This is consistent with the national policy of sustainable development for the benefit of society.
3.The SPC floor has a thickness of 3.5mm to 6mm, which has unparalleled advantages for building load-bearing and space saving in high-rise buildings.At the same time,it has a special advantage in Redecoration and renovation.
4.There is a special high-tech transparent wear layer on SPC floor surface, its wear-resistant up to 8000rpm or more.The wear resistance of the laminate flooring is only 800-4000 rpm,which is more wear-resistant in traditional floor materials .The wear layer of the SPC floor can be used for 5-10 years depending on the thickness under normal conditions .Therefore, SPC flooring has become more and more popular in hospitals, schools, office buildings, shopping malls, supermarkets, and transportation facilities where people flow is relatively large.
5.The physical indicators of SPC flooring is stable and reliable, and chemical indicators meets international and national standards.SPC floor shrinkage: ≤ 1 ‰ (after tempering), ≤ 2.5 ‰ (before tempering), (shrinkage test: 80 °C, 6 hrs)
6.SPC floor wear layer has a special slip resistance, and compared with ordinary ground materials, thefloor  touch more astringent, more difficult to fall in the case of water.Therefore, SPC is the preferred ground decoration materials in public places with higher public safety requirements, such as airports, hospitals, kindergartens, and schools, and has become very popular in China in recent years.
7.The main component of the SPC floor vinyl resin, which has no affinity with water, and it will not be moldy due to high humidity.The surface of the floor has undergone special antibacterial and anti-fouling treatments, which have a strong ability to kill most bacteria and inhibit the reproduce of bacteria .
8.SPC floor fire protection indicators up to B1 level, flame-retardant, not self-igniting, self-extinguishing within 5 seconds of leaving the flame, no suffocating toxic and harmful gases(According to authoritative statistics, 95% of people who were injured in the fire were caused by toxic gases generated during combustion),the fireproof performance of the floor is excellent.
9.SPC floor is suitable for indoor space from extremely cold (-20°C) to extremely hot (60°C).
10.SPC floor is a new type of floor decoration material widely used in various countries in the world. It is widely popular in China, Europe, Americaand Asia-Pacific markets. It has a very broad development prospect.

LinYi YaChen wood company is a wholesale company that manufactures good & high quality plywood from1999.
Our factory covers an area of 23000 square meters with 12 plywood production lines which mainly produce the Plywood ,SPC flooring , WPC decking , PVC foam borad and so on .

 Q1:What is the terms of payment? 
We acceptT/T in advance,L/C,Paypal,etc.You can choose the one which is the most convenient for you.

Q2:Can I obtain samples before mass production? 
After confirm the price,you can require samples to check the quality.The sample charge and freight cost negotialble.

Q3:How long is your delivery time?
Honestly,it depends on the quality and the season you place the order.The leader time of MOQ is about 10 days.We suggest you start the inquiry before the date you want to get the products at you country.

Q3: How could you guarantee your shipment quality?
We are very confident in our products and we pack them very well, so usually you will receive your order in good condition, any quality question, we will deal with it immediately.

Q4:How to contact if encounter problem?
Please send Email to us. Your inquiries will be replied in time, high attention and excellent service also could be provided.

Q5:What is MOQ?

Our MOQ is usually one 20 feet container.If you don't need one container,You can choice stock available.