1. Power supply AC220-240V, 50Hz; 2. Turn on power, heat and fan turn, work 12
hours by default without pressing any key.
3. Press the time key to switch to the timing setting, the old = press the "+-" key to
set the timing time, the new = press the time key to set the time, and then press the time key to switch back to the temperature
setting.
4. The initial display temperature is 20 degrees Celsius, and the temperature setting is set by pressing the upper and
lower buttons, ranging from 15 to 32 degrees Celsius; the timing setting is 1 to 12 hours under the time setting.
5. Switch the
high (HH) and low (LL) speed by pressing the fan key.
6. To reach the set temperature, cut off the heating, the fan continues to
work for 60 seconds, stop, the screen shows OF, below the set temperature - 1, reheat;
7. Arrival time (default 12 hours if not
set), cut off heating, fan continue to work 60 seconds, stop, screen display OF;
8. After work is finished, press any key to
restart work (default 12 hours if no timing is set)
9. If there is "natural wind" function, press the "+-" button for three
seconds to start and display CC; continue to press the "+-" button for three seconds to close, showing the settings of "natural
wind" before starting.
10. Ceramic heating: It has the advantages of corrosion resistance, high temperature resistance, long
service life, high efficiency and energy saving, uniform temperature, good thermal conductivity, fast thermal compensation, and
does not contain harmful substances such as lead, cadmium, mercury, hexavalent chromium, polybrominated biphenyls, polybrominated
diphenyl ethers, etc. It meets the environmental protection requirements of RoHS of EU.