ADSS кабельный предварительно сформированный комплект натяжения аксессуары зажим для парня с мертвым

THE PREFORMED TENSION SET is widely used for the installation of bare conductors or overhead insulated conductors for transmission and distribution lines, the reliability and economic performance of the product is better than the bolt type and hydraulic type tension clamp that widely used in the current circuit.

Innovative structure and precision design, so that the preformed tension set has a reliable performance and it is usually made of aluminum clad steel, galvanized steel wire and other materials

Component

Inner armor rods, outer armor rods, thimble, U-shaped hanging loop, extension loop, bolt, nut, etc.

Characteristic

1. Stress is distributed equally, without stress focus. It can protect optical cabl-es very well.

2. Under the condition of not exceeding the intensity of cable's side pressure, it has higher grip power for the cable, and can support higher tensile force.

3. The grip power for the cable is not less than 95% of rating's pulling resisting intensityof the optical cable, completely satisfying the needs of setting up the cable.

This product is a high-quality Dead end grip .To apply a variety of conductor cross section dimensions.

The clamp and rotating the outer layer of the wire to the same standards for right-handed, such as L - is needed,should be indicated in the order contract.