Машина для производства гидравлической дренажной бетонной трубы

This machine uses the Roller to support the pipe mould, and produce the roller force to concrete in the mould. When the roller rotate at a high speed, the concrete in the mould will spread in the inner wall of the pipe mould and form a cement pipe with the centrifugal force, and when the mould with the inner concrete pass on the roller, the concrete between the mould and the roller will be compacted solid to form a pipe.

vertical extruding pipe-making machine is the ideal equipment to manufacture cement pipe. Reasonable design ,reliable and simple operation ,accord with state standard GB11836-89.This machine mixes river sand ,tubular products of inner diameter 150-800mm . The tubular products made by this machine has the following advantages :average wall thickness ,smooth inner and outer wall ,good impermeability ,high compressive strength ,low cost ,firm and reliable tie-in, convenient construction, high efficiency ,and instant film-releasing maintenance ,etc ,And the tubular products are used widely in irrgationin the field and the water supply and sewage works in the town . Vertical screw extruding Pipe-Making machine 

Roller type

Suspension Roller type Concrete pipe machine is a kind of perfect machine and equipment to produce reinforced concrete pipes and Pre-stressed concrete pipe. 

Vertical type

This machine mixes river sand ,tubular products of inner diameter 150-800mm

(4) The Concrete Pipes are with high pressure load and with high production efficiency. 

1>when can delivery the PIPE machine?
Answer: For common equipments always 15-30 days can finish for delivery.

2>How we know you send machine with no problems?
Answer:Every set block machine will be tested before delivery to confirm it is no problem, we will send you the pictures and test video before delivery.

3>What if when our machine have problems worker can not solved?
Answer: You can take the problem pictures and videos send to us, our engineer will offer solve way within 24 hours.

4>Can I visit your factory?
Answer:Welcome, because seeing is believing, we will arrange car to pick up you, it will take within 10 minutes from our office to the airport.

5>what's the ratio of raw material?
Answer: It depend on your material, for common material the ratio is cement 8%-10%,sand 30%-40% ,stone:50%-60%.