Автоматическая машина для снижения диаметра Стального

Automatic machine works necking necking machine is not cutting equipment, in order to avoid having the production efficiency, simple process, easy to operate, saving raw materials, the advantages of stable quality. It is the use of hydraulic technology round, steel, etc. to be fed into the reduced diameter portion of the grinding wheel via a dedicated shrink molding, compression pressure portion can greatly improve the density of steel, thereby increasing the compressive strength. And ductility, impact toughness diminished, so that the threaded portion and the rod portion consistent strength, peeling lathe solved by reduced pressure and anti-punch toughness drawbacks can expand the diameter of round, anchor bolts, screws double construction, High-speed bridge screws, production of mining anchor, anchor bolts, screws pole of the ideal equipment.

This machine tool belongs to the chip free processing equipment, has the advantages of high production efficiency, easy operation, saving raw materials, stable quality, etc., it is to use the hydraulic technology to feed the required diameter part of round steel into the special mold through the cold compression molding, compression part of steel density can be greatly improved, thereby improving the material tensile strength. And the malpractice of plasticity and impact toughness.

2. High production efficiency: 3 to 5 workpieces can be compressed per minute, which is 3-5 times higher than the peeling efficiency of the lathe. Each machine can produce 2000-3000 pieces per shift, which is very suitable for mass production.

3. High product quality: the diameter, roundness and taper error of the workpiece after reduction shall not exceed 0.03mm. Finish can be over 7, and save steel, after extrusion can be extended by 10%-15%. Taking the diameter of 20mm round steel as an example, the annual output is 864000, which can save 30 tons of steel.

 wooden cases & 30 days after payment 

 Contact person : Jessie zhao