Описание и отзывы

Трекер стоимости

Характеристики

Click the links to see more video: 

https://youtu.be/jP_6_Dfc-nM

https://youtu.be/NfrVBJRgw1g

 

Introduction

Have you ever encountered these problems on battery-powered multi-rotors: it is very hard to get a 45 minutes flight time with 5KG payload at an altitude of 4500 meters, due to the thin air up there. Or it is almost impossible for the multicopter to fly for 1 hour in the cold winter at a minus 10-degree temperature because the battery voltage will drop dramatically in this case. YANGDA YD6-1600L gas-electric hybrid drone is designed to overcome these drone flight time limits. It is using one powerful gas-driven electricity generator which will give you continuous and stable power supply despite the high/low temperature or high altitude, will enable you to carry out long-range inspection, survey, aerial photography, search, rescue, and public safety applications.

Long flight time
When equipped with a 4L fuel tank, the YD6-1600L fuel-electric drone is able to fly 3 hours without payload.

High-performance and stable propulsion system
YD6-1600L hybrid power UAV is using T-Motor propulsion system, which is proved of high quality and stability.

Easy for transportation, quick to set up
Pluggable arms of YD6-1600L frame makes the drone is easy for transportation. The drone set up can be done in 5 minutes by a single man.

Backup battery
YD6-1600L hybrid drone provides 2 units 6S lipo batteries for 90 seconds emergency landing, just in case the gasoline-electric engine fails during the flight.

Multiple payload options
All YANGDA drone gimbal, camera and other payloads like drone megaphone can be installed on YD6-1600L hybrid UAV.

Your Purchase Includes

1 x YD6-1600L carbon fiber hexacopter frame
1 x 2400W Generator
1 x 3.5L Fuel Tank
1 x Generator Control Unit
6 x T-Motor U8 Lite KV85 motor
6 x T-Motor ALPHA 60A HV ESC
3 x T-Motor 29*8.7 inch propeller
1 x Pixhawk 2.1 Flight Controller
1 x YANGDA YR16S 16 Channel Radio Controller
2 x 6S 1800mAh lipo batteries
1 x Generator accessory(starter with battery, fuel level indicator, cable/wire etc)
1 x Assemble and test service

Office