Система контроля доступа и распознавания отпечатков пальцев GROW K216 + R502 емкостный

Описание и отзывы

Трекер стоимости

Характеристики

 

K216 Technical Parameters

K216 Operation Instruction
1. SET Button:
1.1 Press SET button shortly,system in register state and indicator light flash fast, press two times for each fingerprint, fingerprint register successful when hearing music.Fingerprint can be registered continuously when system in register state; if no need adding fingerprint more, waiting 8 seconds.(Fingerprint capacity is 100 pieces when press SET button,the registered fingerprints are stored in database 01)
1.2 When back to factory default, press SET button until hear “Di” long beep and music,means initialization operation successful
2. Remote Control:
2.1 Red indictor lighted means in programming stated, music means operation successful, default password: 123456,password length: 6numbers
2.2 Change password: Press *password*1*new password*new password#
2.3 Register fingerprint:Press*password*2*DD# , DD from 00 to 02(00, 01 and 02 refer tothree different fingerprint databases), each database can store fingerprint 100 pieces; Exit fingerprint in register state when press * button or waiting for 10s.

2.4. Empty fingerprint:Press *password*3*password#

2.5. Control Work Mode:
Press *password*4*00# Fingerprint module touch standby function ON
Press *password*4*01# Fingerprint module touch standby function OFF(Normally on Mode)
2.6. Delay time for closing relay:Press *password*5*SS #; SS from 00 to 20, SS means the closing time for relay(from 0.5s to 20s), e.g.: 00 means 0.5s, 20 means 20s; Default time is 5s.
2.7. Delete fingerprint:Press *password*6*DD#, DD from 00 to 02 (00, 01 and 02 refer tothree different fingerprint databases).
2.8. PasswordUsing:Press *password and relay closed, press # and relay opened.

3 FunctionSet:
When chose 2, closing time of the relay is 5s after pass fingerprint(5s is default time, and it can be adjusted by remote control);
When chose 1, relay closed when fingerprint passed, relay will be opened when removing finger.

K216 can be used together with R300,R301T,R302,R303,R303T,R305,R306,R307,R501,R502,R503 fingerprint module

 

 

R502 Specifications

Model	R502
Type	Capacitive Fingerprint Module
Interface	UART(TTL)
Resolution	508 DPI
Voltage	DC 3.3V
Fingerprint Capacity	200
Sensing array	192*192 pixel
Working current	18mA
Standby current	Typical touch standby voltage: 3.3V, Average current: 2uA
Fingerprint module size	Diameter 22(mm)
Effective collection area	Diameter 15.5 (mm)
Connector	MX1.0-6Pin
LED Color	Blue and Red
Scanning Speed	< 0.2 second
Verification Speed	< 0.3 second
Matching Method	1:1; 1:N
FRR	≤1%
FAR	≤0.001%
Work environment	-20C ---60C
Work Humidity	10-85%
Anti-static capacity	15KV
Abrasive resistance intensity	1 million times
Communications baud rate (UART):	(9600 × N) bps where N = 1 ~ 12(default N = 6, ie 57600bps)

 

Images

 

K216 Circuit board diagram

R502 Circuit board diagram

K216 can be used together with R300 capacitive fingerprint module

 

K216 can be used together with R302 capacitive fingerprint module

 

 

K216 can be used together with R307 capacitive fingerprint module

Package Listing