Гальванический бак для цинкового покрытия/бак хромирования/алюминиевый

Описание и отзывы

Трекер стоимости

Характеристики

Electroplating Tank for Zinc Plating /Chrome Plating Tank/Aluminum Anodizing Tank

 

Main features:

 

The plating bath is used to install a solution for galvanizing, copper plating, nickel plating, gold plating, and the like. The cathode moving plating tank is composed of a trough body of a steel tank lined with soft polyvinyl chloride plastic, a conductive device, a steam heating tube and a cathode moving device. The tank body can also be made of steel framed with rigid polyvinyl chloride plastic. The choice of the tank structure depends on the nature of the plating bath and the temperature. It consists of a motor, a reducer, an eccentric disk, a connecting rod and a pole supporting roller.
 

The main components of the trough include a tank body, a solution heating and cooling device, a conductive device, and a stirring device. The tank body sometimes directly contains a solution such as a hot water tank, etc., and sometimes the basic requirement of the base or skeleton of the lining such as the steel tank is that it does not leak and has a certain rigidity and strength, so as to avoid damage of the lining layer due to excessive deformation of the tank body; The bottom surface of the tank should be 100mm~120mm away from the ground to prevent serious corrosion.
 

  Application areas:

The plating bath is used to install a solution for galvanizing, copper plating, nickel plating, gold plating, and the like. The cathode moving plating tank is composed of a trough body of a steel tank lined with soft polyvinyl chloride plastic, a conductive device, a steam heating tube and a cathode moving device. The tank body can also be made of steel framed hard PVC plastic.

The choice of tank structure depends on factors such as the nature of the bath and temperature. It consists of a motor, a reducer, an eccentric disk, a connecting rod and a pole supporting roller.

The main components of the trough include a tank body, a solution heating and cooling device, a conductive device, and a stirring device. The tank body sometimes directly contains a solution such as a hot water tank, etc., and sometimes the basic requirement of a lining base or skeleton such as a steel tank is that it does not leak and has a certain rigidity and strength.

In order to avoid damage to the lining layer due to excessive deformation of the tank; the bottom of the steel tank should be 100mm~120mm from the ground to prevent serious corrosion.

About Junan Tongda Electronic Equipment Factory :

 

Our company is a comprehensive high-tech enterprise integrating environmental technology research, production, sales and maintenance.

And for ventilation and environmental protection engineering customers: PP waste gas tower, washing tower, activated carbon adsorption tower, electroplating equipment, plastic tank, PP large diameter air duct and various non-standard PP ventilation equipment production or drawings, processing business . Our company has professional ventilation accessories and auxiliary equipment, which can save customers the production cost and production time to a large extent, and shorten the construction period.

          The products of this department are mainly used in acid, anti-corrosion engineering of industrial, agricultural, chemical, environmental pollution and other enterprises. The use of plastic products has the advantages of low cost, light weight, quick and convenient installation, long life and so on. Adoption, plastic-made steel has also been widely used in China.

 

       Electroplating tank, electrolyzer, acid and alkali tank, pickling tank, plastic anti-corrosion plating tank, PP plating tank, PVC plating tank, polypropylene plating tank; electroplating tank is the basic supporting in electroplating equipment.

 

The plating bath is used to install a solution for galvanizing, copper plating, nickel plating, gold plating, and the like. The cathode moving plating tank is composed of a trough body of a steel tank lined with soft polyvinyl chloride plastic, a conductive device, a steam heating tube and a cathode moving device. The tank body can also be made of steel framed with rigid polyvinyl chloride plastic. The choice of the tank structure depends on the nature of the plating bath and the temperature. It consists of a motor, a reducer, an eccentric disk, a connecting rod and a pole supporting roller.

 

The anti-corrosion tank is mainly made of pp and pvc. It has the characteristics of strong acid, strong alkali and anti-corrosion. It is oil-free, copper-plated, nickel-plated, palladium-plated, gold-plated and phosphatized. Acid and alkali resistant equipment, environmentally friendly equipment, waste water, exhaust gas discharge equipment, washing towers, clean rooms, semiconductor plants and related industrial equipment, are also materials for the manufacture of plastic water tanks.

 

Specifications can be customized as customers' requirements ! 

 Packaging & Delivery

 

 

 

 

 

All of our machines use high quality imported material and most advanced equipment production technology .

We also have highly skilled and experienced workers,meanwhile,

we have a standardized production process.So we can provide customers with 

the most excellent and suitable service.

 

Contact Information :