В помещении/на открытом воздухе сценическое освещение для свадебного торжества холодной Блестящий рефлектор машина фонтана фейерверков

Описание и отзывы

Трекер стоимости

Характеристики

                          Wedding Sparkler Machine 

Rated Voltage	AC220V/50H AC120V/60Hz
Rated Current	4.2A    2.2A
Rated Power	500W
Fuse	10A   5A
Spark pre-heating time	<8min
Spark height	2m
Adjust the spark height	no
Wireless remote controller frequency	433MHz/315MHz
Wireless remote controller	W-8+W-3
Display screen	LCD
DMX	support
DMX Channel	1
DMX Range	1-512
Gross Weight	7.5Kg
Net Weight	6.6Kg
Product Dimension(mm)	190*190*260mm
Carton size(mm)	260*260*310mm
6 in 1 flight case size	680*600*440mm(20kg)
4 in 1 flight case size	600*460*440mm(15.5kg)

1. Spark nozzle     2. Powder entrance    3.handle    4.fuse

5.on/off switch      6. USB              7. DMX-512

8. Power out       9. power in          10. wire control plug

11. card scan zone   12. Display board

 

5. Operation instructions:

A. Place the unit on a flat,dry surface. The machine can be inverted, but can not be sidelong, please pay attention to keep upright. Otherwise the spark will not be vertical and probably make the machine damaged.

B. Add the powder and cover the entrance. With electricity. After heating and reach the set temperature, the display shows "Ready To Work" then operate the machine.

C.According the menu instruction to set what function you need.after 10 seconds no operation, ,the sub menu will revert back to main menu and save current setting data.

D. Control method: w-8 remote controller, x-2 wire controller,DMX512 .

DMX: see the DMX channel specification.

The priority : DMX, x-2 wire controller/w-8 remote controller.

5. Menu operation :

Menu button : press the button to setting , the increase and reduce button to make adjustment.

Ready To Work   Indicates that the machine is ready to start.

Warming Up......  The machine is heating up.

DMX512 Add.xxx  DMX512 address: minimum of 1, max 512;

Volume Out xxx %  setting flame volume at minimum of 1%, the maximum is 100%

Wireless    xxx   setting machine address for wireless control, use with W-8 controller, min is 1, max is 3.

Manual Test  manual switch spark out, only for testing

Tip Over  Alarm when machine falling down

 

6. DMX channel specification

1 channel to control spark height. No spark at 0, 1-255 sparks from small to large.

 

 

Contact: Allen 008618718775059