Автоматическая машина для флексографской печати фидерных пазов и высечки производственной

Описание и отзывы

Трекер стоимости

Характеристики

Automatic Feeder Slotting And Die Cutting Flexo Printing Machine For Production Line

Product Introduction

1.Complete machine group

1)Multiple function control with touch screen and PLC, reliable system, low failure rate, simple operation.

2)This machine with the function of automatic zero, auto version adjustment, memory recovery, paper skip feeding, auto lifting falling edition, etc.

3)Machine clutch controlled by electric, set with alarm bell.

4)Pneumatic interlocking device.

2.Automatic front edge paper feeder (China Brand)

1)Leading edge paper feeder mechanism can reduce the blocking phenomenon greatly in the process of cardboard feeding.

2)Main motor is controlled by variable frequency converter, power saving, low noise.

3)Suction fan auxiliary feeding, to ensure smooth into curved board, air volume can be adjusted according to the size of board on each section, guarantee the ability of vacuum force, make the cardboard more accurate.

4)After stop using manual adjustment, baffle, baffle around electric clearance adjustment.

5)Polyurethane materials, feed wheel friction force is big, long durability.

6)Suitable to three or five layers corrugated board, including E corrugated board.

3.Paper feeder above lower roller

1)Above roller:110mm install 148 paper feeding wheel 4pcs,paper feeding roller fast moving structure.

2)Lower roller:148mm

3)Dual rollers for paper feeding, feeding rubber roller fast changing structure.

4.Matched with dust cleaning brush, above suction dedusting fan, assured the paper clean, improved the printing quality, reduced the edition cleaning times.

5.Walking drive shaft equipped with torque limiter, avoid machine crashing.

6.Option: Lead edge paper feeder with pressure reducer can reduce the paper damage.

1. Printing roller

1)Outer diameter:408.4(incl. edition),seamless steel pipe, with surface grinding, hard chrome plating.

2)Printing roller made of high quality steel, with surface grinding and hard chrome plating.

3)Dynamic balancing correction, stable operation.

4)Ratchet wheel fixed rolled shaft.

5) Install uninstall printing edition controlled by electric.

2. Printing pressing roller

1) Outer diameter:176mm,seamless steel pipe, with surface grinding, hard chrome plating.

2) Dynamic balancing correction, stable operation.

3) Automatic locking on adjustment of pressing roller space, adjust scope is0-11mm.

4) Automatic return to zero device, decrease the paper waste.

3.Anilox roller :216mm(as per customer required)

1)With surface grinding on the steel pipe,pressing checkered, chrome plating.

2)Dynamic balancing correction, stable operation.

3)Cooperated with pneumatic lifting device.

4)Matched with surpass clutch, distribute and clean the ink more easily.

5)Optional: Ceramic anilox roller equipped with ink scraper, make the printing effect better.

4. Rubber roller

1)Outer diameter:208mm.

2)Wrapped with wear-resisting rubber on the steel pipe surface.

3)Rubber roller with special grinding to reach good effect of ink transmission.

4)Adopt automatic locking for the space adjustment between rubber rollers.

5. Paper feeding above lower roller

1) Above roller: outer diameter110mm install with 148 paper feeding wheel 4pcs paper feeding roller fast moving structure.

2) Lower roller: outer diameter 148mmseamless steel pipe, with surface grinding, hard chrome plating.

3)Paper feeding roller adopt auto locking mechanism, scope is0-11mm.