2019 г. копье для пива из нержавеющей стали 5

1. You can transfer your beer form your barrel directly, and you needn't to unscrew the beer spear.

2. There is no beer be exposed to the air, and the beer will be fresh.

3. One mini ikeg spear, double function: filling beer into keg, tapping beer out.

1. Rinsing the whole system with cold water. 

2. Cutting the beer tube to suitable length, and attaching the tubw to the spear.

3. Screwing the spear on the keg.

4.  screwing the outlet part on the apesr.

5. Attching the faucet the the beer out connector.

6. Attaching the co2 inlet ball lock to the post and let the CO2 flow into the keg. At the same time the air will flow out from the keg.

7. Pulling CO2 inlet ball lock up

8.  Attaching the beer inlet ball lock to the post and let the CO2 flow into the keg. At the same time the CO2 will flow out from the keg.

9. Pulling beer inlet ball lock up when the keg is full.( You can see the beer from the  outlet part.)

10. Unscrewing the outler part, and screwing the twist tube part on the spear.

11. Screwing the CO2 cartriage to the mini CO2 regulator.( Make sure thr pressure dial is off.)

12.  Screwing the  mini CO2 regulator on the spear

13. Turn pressure up to desired setting.

14. Tilt glass, hold close to the spout. Open faucet completely, let go.

15. Enjoy the fresh and carbonated beer.