Ультрапрозрачная эпоксидная смола для ложной воды 2:1 устойчивая к

Описание и отзывы

Трекер стоимости

Характеристики

 Crystal Epoxy Resin AB Glue For Jewelry Accessories

 

Product Description

 

Epoxy resin 2120AB-M3-2 can be cured under normal temperature and high temperature, with the feature of good flowing property, natural defoaming, anti-yellow, high transparency, no ripple, bright in surface.318AB can be widely used for drops of glue, signs, cards, crafts, lighting, photo frame, lamp potting and mold filling, etc..

 

Product Details

Properties before Hardening

Part	2120A-M3-2	2120B-M3-2
Color	Transparent	Transparent
Specific gravity	1.15	1.15
Viscosity (25℃)	800-2000CPS	100 MaxCPS
Mixing ratio	A: B = 100:50(weight ratio)
Hardening conditions	25℃×7H or 80℃×2H(2g)
Usable  time	25℃×40min(100g)

 

Operation

 

1.Weigh A and B glue according to the given weight ratio into the prepared cleaned container, fully mixed the mixture again the container wall by clockwise, place it along for 3 to 5 minutes, and then it can be used.

2.Take the glue according to the usable time and dosage of mixture to avoid wasting. When the temperature is below 15 ℃, please heat A glue to 30 ℃ first and then mix it to the B glue (A glue will be thicken in low temperature ); The glue must be sealed lid after use to avoid rejection caused by moisture absorption.

3.When the relative humidity is higher than 85%, the surface of the cured mixture will absorb moisture in the air, and form a layer of white mist in the surface, so when the relative humidity is higher than 85%, is not suitable for room temperature curing, suggest to use the heat curing.

 

 

 

Properties after Hardening

Hardness, shore D	<75
Withstand voltage, KV/mm	22
Flexural strength, Kg/mm2	28
Volume resistivity, Ohm3	1x1015
Surface resistance, Ohmm2	5X1015
Thermal conductivity, W/M.K	1.36
Induced electric loss, 1KHZ	0.42
Withstand high temperature, ℃	80
Moisture absorption,  %	<0.15
Compressive strength, Kg/ mm2	8.4

 

Caution

1,The operating environment should be ventilative and should keep away from fire. Closely sealed after use. 
2, Avoid eye contact,  in case of contact, wash with plenty of water and get medical attention immediately.

3, If contact skin, wrap with clean cloth or paper, and wash it with water and soap.
4, Keep away from children.
5, Please take a trial before application to avoid usage mistake. 
 
Storage And Shelf Life

1, Store at the temperature of 25°C or cool and dry place.  Avoid from sunlight, high temperature or high humidity environment.

2, Use up as soon as possible when opened. It is strictly forbidden to expose to the air for a long time after it is opened to avoid affecting the quality of the products. The shelf life is six months in the room temperature of 25°C degree.

 

Product Show

 

 

 

 

Company Introduction

 

Jin Hua of Shenzhen City Electronic Materials Co., Ltd. is specialized in high-tech enterprises of epoxy resin and curing agent AB two processing, is currently one of the most professional supplier of epoxy resin adhesive,at pressent it is the most competitive, our company is a research,development, production, sales and service in one of the professional firms. It has a more than 2000 square meter factory now. Equipment introduction adopts international advanced technology and standards. Refer to excellent formula at home and abroad, with high-performance raw materials in the United States, Japan, Germany and other places. All aspects of production have been strictly performance, environmental protection, health indicators test, and through the national authorities to detect certification, in the domestic industry-leading level.

 

The company mainly produces crystal glue, epoxy resin adhesive, electronic potting glue, solar accessories, board resin glue, adhesive and other special grinding;

 

All the staff of the company will uphold "honesty, harmony, innovation, rigorous" enterprise culture, adhere to the "management step by step, the eternal development" concept, constantly strive to forge ahead, innovation, all for customer needs as the center; all customers for the development of power; all customer satisfaction as the starting point; Jinhua hand in hand together with you, create brilliant!

 

Certificate

 

 

Packing & Shipping 

 

 

                                                    

                                                              FAQ

 

1, Why Choose Jinhuaglue?

1) Jinhuaglue owns ISO9001-2008 audited factroy of 3500sqm, all the materials are offered by factory directly.

2) Jinhua has R&D team, we accept OEM, and small order is acceptable

3) Jinhua has already ship to over 30 countrys, aboudant experiecnce on the exporting.

4) Jinhua with output of tons per day, ensure the fast on time delivery

5) Jinhua keeps all the samples for each shipment, so that to make the quality trackable.

 

 2, What Kind of Quality Certificate Jinhua has?

1) REACH,

2) RoHS

3)SGS

4) UL

5) MSDS

 

3 Do Jinhua has MSDS for shipment?

 Yes, we do have MSDS for shipment all our epoxy and PU resin

 

Regarding Take Delivery

Please check the goods before signing the goods, check the quantity, if there is any damage or not, please contact our company,we will our best to solve it!

 

Payment Terms

We support T/T,D/A,D/P,Western Union,Paypal or others convinent for customers that I could accept payment terms!

 

Our Services

FREE SAMPLE IS AVAILABLE!!!

Jinhua professional produce and market all kinds of epoxy resin AB glue which covers a very large range of applications: Soft AB glue for stickers, LED strip potting, badge, nameplate, nail cutters, keychain!!!

Hard clear resin for LED channel letters, photo frame coating, hand made diamond, jewelry, crafts, nacklace, bangles, bracklets, earrings, rings, miniatures such as simulated water, soup,lquid drinks and fishbows to be used in a child's dollhouse, anything you can image clear and shinning, but cheap and easy to operate!!!

Coating resin for surfboard, paddle, christmas ball, globe, foam products coating, bicycles, boats, golf clubs,skies, snowboards, swimming pool, garage, wood table coating, Epoxy flooring, to make it hard and durable!!!

Special ahhesion for wood, metal, glass, stone and some plastic.With very strong and high durable bond after cured!!!

Flexible potting resin for electronic products such as motors, generators, transformers, swithgeear, insulators, mold filling,LEDs, perfectly to protect the potting items from short circuit, dust, water, and moisture, and giving the potting items a more stable and longer life than unpotted products!!!

Pls contact us to discuss your application for a best EPOXY SOLUTION!!! 

All of our products has ROHS, REACH, UL

CERTIFICATE!!!

 

You may like: