Поставщик аппарата для точечной сварки сделано в

Compact design, easy to operate, simple to use, stable performance.

1. The welding transformer adopts the optimized structure design. The all-copper secondary pole coil and high magnetic material are made.

2. The welding controller adopts the integrated control system of single chip microcomputer, input various parameters by high-precision digital keys, and is equipped with the first parameter control of welding current, welding time and wave. All parameters can be controlled within the cycle number.

3. The primary welding loop is controlled by imported integrated two-way thyristor to ensure the stable output of welding current.

4. The machine head is designed in the form of vertical pressure, and it is equipped with precise sliding block to make the transfer pressure flexible and reliable, the electrode is free of displacement, the flexible and convenient pressure adjusting structure and the non-wearing contact switch can guarantee the quality of welding parts.

5. The lower electrode arm can be adjusted freely from top to bottom and from left to right, so as to avoid special workpieces.

Our factory in the continuous innovation and progress, if there are changes to the material subject to notice.

Spot welding machine, small pneumatic spot welding machine, pneumatic spot welding machine, air pressure spot welding machine, 35KVA spot welding machine, 50KVA spot welding machine

Air-pressure Spot Welding machine,

1. This spot welding machine is modified by foot step spot welding machine with cylinder, electromagnetic valve, control box, foot pedal,

2. This kind of spot welding machine has the compact and convenient foot step spot welding machine, as well as the easy characteristics of air pressure spot welding machine.

3. It is mainly used for spot welding machine within 2MM of sheet metal, which is economical and affordable, and the welding pressure can be adjusted automatically. The operator is very relaxed.

4. With the performance of automatic continuous spot welding, it is very convenient and quick to weld some rhombic nets or small barbed wire that need continuous spot welding, and the workpiece can be removed.

5. Taiwan type control box, copper transformer and Korean solenoid valve ensure the long-term stability of your machine.

Three. Air pressure spot welding machine, pneumatic spot welding machine, air pressure touch welding machine, high-power spot welding machine, high-power touch welding machine, precision spot welding machine

60KVA spot welding machine, 80KVA spot welding machine, 100KVA spot welding machine, 150KVA spot welding machine, 200KVA spot welding machine,

Auto plate spot welding machine, iron plate spot welding machine, nut spot welding machine, bolt spot welding machine, iron processing spot welding machine, long arm spot welding machine

Air-pressure Spot Welding machine

It is mainly used for welding of low carbon steel, stainless steel and part of non-ferrous metal, and can realize welding of plate and plate, plate and convex welding nut and stud.It is the field of automobile, household appliance manufacturing, metal box and other parts welding

Performance features:

It is mainly used for welding of low carbon steel, stainless steel and part of non-ferrous metal, and can realize welding of plate and plate, plate and convex welding nut and stud.It is the field of automobile, household appliance manufacturing, metal box and other parts welding

1. Direct pressure mechanism has good follow-up performance and fast welding speed

Solenoid valve adopts Japanese kuroda, quick reaction, good quality, and solenoid valve is directly connected with cylinder to speed up action reaction, which can reduce the loss of air flow.

2. Long service life and low noise

The machine body is reinforced with strong steel structure, which can resist impact and vibration, realize stable welding, fine machining and compact, smooth operation of the cylinder, improve service life and reduce noise.

3. Safe and convenient to use

The filter cup of the high-performance air path system is equipped with a protective cover, which can prevent the debris spatter when the cup is broken, and also protect the impact from external impact.The cup and cover can be loaded and unloaded, easy to repair.

4. Adopt water-saving forced cooling method

Adopt circulating cooling water to avoid water waste and reduce cooling water greatly.Work longer hours.

5. The upper insulation is simple and practical

The secondary conductor adopts the upper insulation method, which can avoid the short circuit accident of the insulation part easily caused by the attachment of iron chips or the installation of welding tools at the lower seat.

6. The main circuit adopts high-power SCR contactless switch

The main loop adopts water-cooled high-power thyristor element, and the output power supply is strong, stable, reliable and has a long service life.

7. High conductivity, low power loss and high temperature automatic protection.

In the secondary current loop, the secondary output of the main transformer adopts multi-layer high-toughness and high-conductivity red copper soft belt, which is connected in a V shape.The service life is improved greatly, the lower secondary output adopts the integrated direct connection mechanism, and the power loss is reduced to the minimum.

The main transformer is equipped with a temperature control system. The temperature of circulating water is too high. The machine will be automatically cut off.

4. Air pressure type welding machine, welding machine, mesh welding machine, multipoint welding machine, pet cage welding machine, lay rack welding machine, 60KVA welding machine, 80KVA welding machine,

100KVA welding machine, 150KVA welding machine, 200KVA welding machine, high power welding machine, long arm welding machine

Detailed Drawing                                        

Product strength:

Our company makes use of advanced production equipment and testing equipment following the ISO9001 quality assurance system, which is in strict accordance with the requirements of production to ensure product quality and reliability. The production process to implement the "three inspection" (self-inspection, mutual inspection, special inspection) procedures to ensure control of product quality. The manufactured products require the "three pass" (raw material into the plant pass, semi-finished product pass, finished off the factory pass) to ensure reaching the required quality; finished product storage, transportation and sales in the market were also included in the product quality management.

Our service:
 

Standard export plywood case packing or pack with customers' request.

Payment type: T/T(Confirm contract pay 30% deposit, pay the balance before delivery).

We can offer OEM or ODM service, according to customers requirements.

Warranty: One year warranty, the Seller shall supply the free replacement spare parts (but NOT including the mould, wearing parts and the items of wrong using), and the delivery cost will bear on the buyer's account.

Product strength:

In each stage of process from product development, production and sales we adhere to make the strict management, control and following National Standards, which is in strict accordance with the requirements of production to ensure product quality and reliability; Resistance spot projection welding machine has passed Certification for China Compulsory Product Certification. 

Q1: Are you a factory or a trading company?

A1: We are a machine manufacturer for more than 20 years.Our factory is located in Raoyang,Hebei,China.

Q2:  I want to produce some iron products,could you offer the corresponding machine to me?
A2: Of course,please tell me the material and the size of your products,and have better offer the photos or drawing to us,I would recommended the machines to you.

Q3: Do you offer the custom machine service?

A3: Yes,please offer the samples or the drawing of your products,then we could make a design to custom the machine for you.

Q4: Could you arrange the technicist to repair the machine oversea?

A4: Yes.But the cost of travel need pay by customers.

Q5: Could you teach me how to use and debug the machine?

A5: Of course.We could send the videos to teach you and we have manual for you.

Q6: What is your warranty period?

A6: One year warranty, the Seller shall supply the free replacement spare parts (but NOT including the mould, wearing the mould, wearing parts and the items of wrong using), and the delivery cost will bear on the buyer's account.

Q7: Could you help to weld(produce) some samles for me?

A7: Yes,please sent us the raw material,I would help to weld(produce).

Q8: How many years could your machine use? 

A8: More than 10 years if you have a right operation and maintain.