Бак для экстракции растительного эфирного масла травяная

Описание и отзывы

Трекер стоимости

Характеристики

Features

SUS316L or SUS304
Accordance to GMP standard
20 years' experience make and install
Difference volume for choose

Provide you the whole production line for herbal extraction

 

 

Application:

It is suitable for traditional Chinese medicine, plant, animal, food and chemical industries, such as normal pressure and pressure water decoction, warm extraction, heat reflux, forced circulation, percolation, aromatic oil extraction and organic solvent recovery process, especially the dynamic extraction or countercurrent extraction effect is better, short time, high concentration.

 

Components:

The extraction tank is composed of an extractor, defoaming device, condenser, cooler, oil-water separator, material pump, filter, valve and pipeline.

The main body of the extracting tank consists of an inner cylinder, a jacket layer, a heat insulating layer, a branch ear, a pneumatic slag discharging gate, and a heat insulating layer of the extracting tank,and the aluminum silicate rock wool is used as the heat insulating material, the inner cylinder body is SUS304/316L. The tank is equipped with CIP cleaning ball, thermometer, explosion-proof sight lamp, quick opening feed gate, etc..

 

Characteristics:

1. The slag door structure adopts closed cylinder slag door,there are two cylinder pushing turn solid rotation aside, thread structure which make its multi wedge block drive the door lock up slag, slag door and tank flange platen close and seal well, with high safety factor.

2. Material discharget pipe adopts stainless steel pipe, liquid outlet joint is sealed reliably,  avoiding the fatigue stress of the metal hose and affecting the frequent breakage and leakage.

3. Complying with (GMP) standard requirements.

 

Stainless Steel Dynamic Extractor Residue Discharging Door

1 Rapid open safety type residue discharging door

The tank cover can be automatically opened and closed. It adopts three-cylinder control and is provided with safety device to avoid accidental operation and provide high safety factor. It is suitable for use in small and medium-size reside discharging vent.

 

2 Rotary type residue discharging door

The tank cover can be automatically opened and closed. High temperature and high pressure extraction can be achieved in the swivel type product. It provides more selection for extracting technology. It can also meet some special technological requirements. With good safety guarantee functions and the extracting tank has no leakage.

 

3 Large-diameter residue discharging door

The tank cover can be automatically opened and closed. High temperature and high pressure extraction can be realized to provide more selection for extracting technology. With high safety factor, the residue discharging door is suitable for residue discharging of large-diameter upside-down type extracting tank.

 

4 Another option of liquid discharging in the extracting tank

(1) The filter board at the bottom of the extracting tank is made of two layers. The first layer is a 5-6mm thick stainless steel sheet with a thickness of 0.6mm thick is at the top of this supporting layer, and long holes of 0.5*10mm are spread over the stainless steel sheet. The long holes are comparably not easy to be blocked.

(2) According to material requirements of customers ,the filter barrel is installed on the internal bladder or the extracting tank. Vertical grain type filter screen can be adopted. The filtering area of the filter barrel is several times higher than the bottom area, which can solve the problem of blocking and difficult liquid discharging at the bottom of the extracting tank.

 

Technical parameters:

Model specification	DTQ-1	DTQ-2	DTQ-3	DTQ-6	DTQ-8	DTQ-10
Tank capacity(L)	1200	2300	3200	6300	8500	11000
Inside design pressure	0.09Mpa
Jacket design pressure	0.3Mpa
Compressed air pressure	0.6-0.7Mpa
Feed inlet diameter(mm)	400	400	400	500	500	500
Heat area(m2)	3	4.7	6.8	10	12	15
Condensation area(m2)	4	5.4	8	10	15	18
Cooling area(m2)	1	1	1	2.2	2.2	2.2
Filter area(m2)	0.25	0.25	0.25	0.3	0.3	0.36
Steam consumption(t/h)	285	346	570	718	903	1140
Water consump[tion(t/h)	2.1	2.5	4.2	4.5	6.7	8.3
Slag door diameter(mm)	600-1000		1000-1200		1400-1600
Agitator speed(rpm)	36
Agitator motor(kw)	3	4	5.5	7.5	11	15
Equipment weight(kg)	1100	1900	2300	3800	4500	6800

 

Installed extraciont tanks:

 

 

 

Falling film evaporator:

 

It is usually used together with vacuum evaporator and alcohol recovery tower.

 

Vacuum evaporator

 

Alcohol recovery tower

 

Our factory and workshops: