Материал ПЭТ и высокотемпературная Фольга для горячего

Because of the hot stamping process is simple and fast, no pollution, good adhesion, it is generally recognized and accepted.
The transfer pattern is rich, colorful, kaleidoscopic, small color difference, good reproducibility, heat transfer film can meet the design requirements of the pattern effect, and is suitable for mass production; through hot stamping machine, transfer exquisite pattern from heat transfer printing film onto the surface of the substrate product by heating and pressure, after forming, the ink layer and the surface of products will combine as a whole, vivid and beautiful, greatly improve product quality and increase product added value.

A:Yes, free sample is available but the express cost will be covered by the receiver.

A:We are manufacturer with export license.

A:We accept MOQ as 2000m.
For example, 640mm wide film needs MOQ as 1280 square meters.
1280mm wide film needs MOQ as 2560 square meters.

A:Payment<=1000USD, 100% in advance. Payment>=1000USD, 30% T/T in advance, balance shall be paid before shipment.

A:Normally 7-10 days after deposit received.

A:Our standard film width is 640mm and 1280mm, but we accept customized width as wide as 1350mm, welcome to contact with us for other required sizes.

A:Hot stamping temperature range is normally considered as 140 to 180 Celsius degrees, once the best temperature is set, it should be kept constantly, the temperature difference is kept within + 2℃.
Hot stamping pressure is generally 6 - 4 kg/cm2.

1. To handle gently, to put straight, upright, not horizontally during transport of our products.
2. Protect from pressure, dampness, heating, and sunshine, storage temperature is 0-25℃.
3. Do regular testing for color and adhesion before use, if any problem found, stop use and to inform the manufacturer for handling negotiation.
4. Storage period: recommended storage cycle not more than 12 months.