Профессиональные высококачественные промышленные прочные ламинированные резиновые

Hulling capacity: 14"SBR white 400mt  brown 350mt   14''NBR white 550mt brown 500mt  14''EPDM red 650mt

Application:

Husking or de-hulling is a process for removing the rice hull from the rough rice. The rubber roll husker is by far the most important technology used today for husking rough rice.

The rubber-roller huller is the most efficient hulling machine.  As the name suggests two rubber rollers of the same diameter are operated at different speeds to remove the husk from the paddy. One roller has a fixed position and the other is adjustable to meet the desired clearance. The adjustable roller rotates slightly slower than the fixed roller. Rubber-roll hullers have an aspirator in the base of the machine to separate the hulls from the brown rice. 

Advantages:

Reduced breakage of milled kernels.
2. High hulling efficiency.
3. By products are free from sand and silicon.
4. Brown rice kernels are not scratched, higher quantity of bran compared to under runner disk husker.
5. Optimum effiency for longer and smoother service life and better output. 
6. Ensure high degree of heat resistance and durability.

Pay Attention:

1. Optional of Rubber Rice Husker Roller: For the choice of  the black, brown and white rubber roller with hardness shore A 90℃ and 95℃, it should be according to the type of rices, climate conditions, and different seasons.Try to avoid to use the single roller,  the recommended way is higher hardness for fast rollers, lower hardness for slow rollers.

2.Temperature and Hardness Control: The proper hardness is shore A 82-86℃, and the temperature is below 50℃. When the temperature reaches above 60℃,  the hardness of roller should be reduced 4-8℃.

3. Alternative use of rubber rice roller is recommended:

A: It can increase the usage life of roller and quantity of dehusking rice.

B: Each roller has break time during the working, which is good for recoving the function of rubber, adjusting the speed difference upon different diameters, and controlling the temperature effectively.

4. Two rollers should be at the same level to keep the space equal.

5. The paddy inputting should keep the balance.

6.  Keep the rate of the re-hulling under the limitation.

Storage:

A: Avoid the direct sun shine and soaked in the rain and snow.

B: Away from the heating device about 1.5m. 

C: Store in dry and clean place, away from acid, alkali, salt, oil and organic solvent.

D. Keep the room temperature 10-30oC, comparative moisture 50-80oC 

E. Keep in vertical position,  horizontal is not allowed.

F. No other materials pressure on it, no hitting to avoid deformation and damage

GO HOME

MORE PRODUCTS