Пластина для вулканизации при комнатной температуре силиконовая резина с рисунком электронных

pad printing silicone rubber for Electronic toys patterns applications:

Electronic toys patterns printing pad silicone rubber is mainly applied in printing of irregular patterns on plastic toys, electroplating products, decorations, trademarks, artworks and stationery etc.

pad printing silicone rubber features:

Electronic toys patterns pad printing silicone rubber is a carrier which transfers the patterns from the steel plate onto the products surface. It has the advantage of good printing effects, fine quality, good resilience, and without any impurity.

How to Use:

1. Uniformly stir the printing silicone rubber for 5-10 minutes in the package barrel before use.

2. Clean the mold with detergent, and dry up the mold by a piece of cloth or an air gun and then coat the mold with a layer of release agent.

3. The normal proportion between the printing silicone and si-oil depends on the requirements of the customers. If pattern is too big, a soft silicon pad is needed and the amount of si-oil is increased. Contrarily, if a silicon pad with high hardness is needed, the silicone oil should be added less or not. The appropriate hardness of general pad printing silicone rubber is 15A°~-25 A°; if too much silicone oil is added, the silicon pad is so soft that the printing times is limited, thereby bringing about abrasion intolerance, solvent intolerance and aging.

Storage, Transportation and Notes:

1.The products should be deposited in a clean, ventilating and shade place.

2. The products are non-dangerous goods.

3. Avoid skin and eyes contacting with the curing agent in processing.

4. Once exposed, immediately wash with certain detergent and water. If splash into eyes, should wash with flowing water at least 15 minutes and consult a doctor

Why the silicone pad is oily?

Pad silicone itself never be oily, if it is oily, It is because it added in too much silicone oil. Usually, we never advice custom add silicone oil. If it is necessary, the addition mix ratio should be less than 3%.

Why we should add silicon oil into patterns printing silicon:

Customers should change the hardness of the patterns printing silicone pad according to the different patterns. Silicon oil can change the hardness and the viscosity of the liquid patterns printing silicon rubber.

OTT New Material Co., Ltd. is located in Guangzhou, Guangdong. We are a leading professional manufacturer of silicone material with integrating R&D, production and sales. Main products are condensation molding silicone rubber, addition molding silicone rubber, addition electronic potting silicone rubber, condensation electronic potting silicone rubber, leather printing roller silicone rubber, LED strip light silicone rubber, human casting silicone rubberneck and over hundreds kind of silicone rubber and related products. Our customers are from all over the world. If you are interested in our products, please feel free to contact us for further information.