Настольный адаптер питания 95 Вт 14 5 в ма ac к dc

1. Input Characteristics
1.1 Normal Input Voltage:
It is normal for 100~240Vac input AC voltage
1.2 Input Voltage Range:
The Power shall operate form 90-264Vac.
1.3 Rated Input Frequency:
It is normal for 50Hz or 60Hz and single phase.
1.4 AC Input Frequency Range:
The Power shall operate with an input frequency from 47Hz to 63Hz
1.5 No Load Power Consumption:
Maximum non-load power consumption is less than 0.15W at 115Vac/60Hz and 230Vac/50Hz
(Retest it after full load for 15 minutes)
1.6 Inrush Current (cold start) : 30A Max. @110Vac/60Hz
: 60A Max. @230Vac/50Hz
2. Output Characteristics
2.1 Rated Voltage(Constant voltage mode)
The rated output voltage is specified at 14.5V
2.2 Voltage Range
The output voltage will be performed 14.5V±5% when the load is 0A~6.0A steadily
2.3 Current
This Power can work from 0A~6.0A and output voltage is in section 2.2 specified range
2.4 Ripple/Noise
Output Ripple voltage is 200mV peak to peak or less.(100Vac 60Hz/240Vac 50Hz)
3. Protection
3.1 Over Voltage Protection:
The output shall be protection to latch off at over-voltage condition , maximum value can’t be over 2 times the rated voltage ( 29V) , That might be return to normal state by AC reset less than or equal to 5 seconds
3.2 Over Current Protection(more than the 5S):
Over current range: more than the 10A(110V) more than the 12A(220V), The single over current power should be restored automatically (115Vac/60Hz or 230Vac/50Hz)
3.3 Short Circuit:
Instantaneous (2~3 and 3~10 seconds) short circuit, no damage, no odor, smoke, fire, plastic deformation, excessive heat generation. The power supply should be automatically restored. When the fault state is removed, it will enter the normal state
4. Environment (temperature and humidity)
4.1:Operating temperature 0℃~40℃
4.2:Operating humidity 20%~ 90% ( Relative humidity).
4.3: Storage temperature -20℃ ~ 80℃.
4.4:Storage humidity 0%~ 95%. (Relative humidity).
5. Electrostatic Interference (EMI)
5.1 The power supply shall complied to:
FCC part 15 : Class B for radiated and conducted emissions.
EN , Class B for radiated and conducted emissions.
GB9254-2008,GB17625.1-2012
6. Mechanical Specification
6.1: Net Weight (g) : 309g/pcs
6.2: Outline Dimension: 129.6*58.5*31 mm
6.3: Outline Color:
6.4: DC Cable: 16AWG SPT-2 L500mm±10mm DC plug,SR7.8*6.8(total length)
6.5: DC Connector

Our Mission: To provide 101% assured good power!

¤ 25,000m² factory rolls out 3500,000 units every month.

¤ Own mold department with 900 workers.

¤ R&D specialists average 22 years industry expertise.

¤ Each power supply are strictly license certification standard production.

¤ Product repair rate is less than 0.2‰.

¤ 18 series and over 1,000 items for your selection .

¤ Orders shipped in as fast as 15 days; NO MOQ .

1. Feature of GVE :

1->.: 3 years warranty.

2->.: DOE VI Compliant.

3->.: All units are 100% burn in&tested.

4->.: Over current, Over voltage, Short circuit and overload protection.
5->.: Strong R&D team, new items updated monthly.

2. Special service:

1->.: 1~5pcs free samples for your test.

2->.: OEM/ODM are both available.

3->.: Fast response,professional sales and engineers follow up your business.

4->.: Quality Assurance ,All adapter have been 100% tested before shipment. Serious

aging test for a few hours before packing to make sure reliable quality

5->.: Lead time: sample in 5-7 days; bulk production 10~15 days.

As a leading power manufacturer, we provide various power products including power adapter, ac dc adapter, charger, power supply, etc. Our power products are widely used in appliances below.

1. Security: CCTV camera

2. Lighting: LED light, LED strip

3. A&V: Hifi speaker, DVD player

4. Printer: 3D printer

5. Financial equipment: POS

6. Pump: Aquarium, RO.

7. Network switches: POE

8. Consumer electronics: Laptop

Please note that this type of power adapters can be used in LED, CCTV camera and POS printer. Other applications are supported by desktop adapters. You can click the first title to choose adapters you need.

Q1. Are you factory?

-Yes, we are a professional power adapter factory established in 1999.

Q2. Can you provide samples?

- Yes, free samples, but customer pay for transportation fee.

Q3. What is your terms and payment terms?

- T/T or CASH. T/T : 30% deposit, 70% before shipment.

Q4.  Whats your lead time?

- 3-7 workdays for sample ready,12-15days for bulk production.

Q5: Can you do the OEM?
- Yes.