Роликовая машина для прокатки алюминиевых листов механической

Описание и отзывы

Трекер стоимости

Характеристики

Aluminum sheet rolling Machine roller form machine mechanical steel bat rolling machine for sale  

 

1.The Feature of Mechanical Plate Rolling machine 

machine widely used in petroleum, chemical industry, cement, boiler, shipbuilding, aviation, water conservancy, power transmission towers and other machinery and equipment. Its working principle is rotating bending deformation. For the upper roller can be moved no matter up and down, but also horizontally, so no need additional press or equipment, can realize bending, as well as correction of the workpiece.

2.The whole structure of Mechanical Plate Rolling machine 

A. The machine adopts 3-roller symmetrical structure with the upper roller moving vertically in the center between the two lower rollers, which is achieved through the drive of the screw, the unt, the worm and the lead screw.

B. The two lower rollers rotates, and provides the plate materials with torque through the engagement of the output gear of the moderator with the gear of the lower rollers.

C. adapted for bending metal plate into round, arc, and so on. Its working principle is rotary bending deformation. This product is widely used in chemical industry, Cement, shipbuilding, boiler, aviation, water control project, Power Transmission Tower, metal structure and the industry of making machinery.

3.The Feature of Mechanical Plate Rolling machine

A. The machine adopts 3-roller asymmetrical structure with the upper roller as the main drive and the lower roller making vertical movement so as to clamp the plate materials tight. The machine drive comes from the engagement between the gear of the lower roller and the gear of the upper roller.

B. The machine is the most precise 3-roll machine in its category. The RGS design reduces to a minimum the distance between the bending points guaranteeing higher bending accuracy.

C. The Ultra wide roll support with lubrication circuit is mounted within linear slides to prevent wear and tear.

D. The very high rotation power is a guarantee of the Machine superior rolling torque and speed, available without loss of energy as all three rolls are driven independently by Gear and gearboxes directly coupled to the rolls shafts.

4.Major parts of the manufacturing process 

A. Working rollers: cast steel ingot (chemical composition analysis): check performance-forging roughcast — forging annealing-UT flaw — roughing (mechanical tests)-heat treatment (hardening and tempering) — UT flaw — semi finishing — finishing — MT
B. Large forgings: cylinder body, gear, gear shaft forging roughcast — surface inspection – roughing — UT flaw — UT flaw detector heat treatment — finishing semi—finishing — MT
C. Welding structure: racks, chassis, wheel box Plate into the factory (chemical composition analysis, mechanical properties test) — pretreatment — for sheet metal cutting-welding-seam UT or RT flaw — annealing treatment — roughing-finishing— vibration destressing—hot blasting —finishing

Product parameters:

Model	Max.	Max.	Plate	rolling	minimum	upper roller	Bottom roller	Motor
	thickness	width	yield	speed	diameter	diameter	diameter	Power
	(mm)	(mm)	(Mpa)	(m/min)	(mm)	(mm)	(mm)	(Kw)
W11-4*1500	4	1500	245	5	300	150	140	3
W11-6*1500	6	1500	245	5	380	160	140	4
W11-6*2000	6	2000	245	4.5	380	170	160	5.5
W11-6*3200	6	3200	245	4.5	380	220	180	7.5
W11-8*2000	8	2000	245	4.5	400	185	170	5.5
W11-8*2500	8	2500	245	4.5	550	240	180	7.5
W11-12*2000	12	2000	245	4.5	550	240	180	7.5
W11-12*2500	12	2500	245	4.5	600	260	220	11
W11-12*3000	12	3000	245	4	700	280	240	11
W11-16*2000	16	2000	245	4	600	260	220	7.5
W11-16*2500	16	2500	245	4	700	280	240	11
W11-16*3200	16	3200	245	4	850	340	260	15
W11-20*2000	20	2000	245	4	700	280	240	11
W11-20*2500	20	2500	245	4	850	340	260	15
W11-25*2000	25	2000	245	4	850	330	270	15
W11-25*2500	25	2500	245	4	900	370	270	22
W11-30*2500	30	2500	245	4	1200	420	360	30
W11-30*3000	30	3000	245	4	1200	450	390	37
W11-30*3200	30	3200	245	4	1200	480	400	37
W11-40*2000	40	2000	245	4	1200	500	400	37
W11-40*2500	40	2500	245	4	1400	480	400	37
W11-40*3000	40	3000	245	4	1600	500	400	45
W11-50*3000	50	3000	245	4	2000	600	480	60
W11-60*3000	60	3000	245	4	2000	700	560	75

 

 

 

 

 

 

Guarantee period:
Our product quality guarantee period is 12 months from B/L date. During guarantee period, we will provide spare parts without any charge in case of quality discrepancy caused by us. If the malfunctions are caused by customers’ incorrect operations, we will provide customers spare parts at cost price. We also can offer flexible extended warranties according to the actual situation.  
After-sales services:
Our engineer can go to your factory for installation and showing operation details on condition of you provide the round-trip air tickets, visa formalities, food and accommodation. In turn, your engineers can come to our factory for learning the installation, operation and maintenance for free.
Why Choose Us:
1. We will run the machine for a few days, and use your materials to do the test. Only guarantee the machine shows best performance, and then we will ship out.
2. Our elite teams can provide you professional, customized, and all-round services around the clock. If you need any help, contact us by WHATSAPP, Skype, Email or Telephone.
How can we provide you efficient services (metal processing solution):
There are Three Steps as following: 
1. Gather your requirements based on your real working situation. 
2. Analyze your information and provide our feedback. 
3. Offer options based on your specific needs. For instance, reg. standard products, we can offer professional recommendations; reg. non-standard products, we can offer professional designing.