Заводская кромкооблицовочная машина Jinan для деревообрабатывающего фрезерного станка с ЧПУ Кромкооблицовочный станок предварительной

 Apex engraving machine equipment advantages

1.Apex: The fuselage is made of high-quality steel welded, and the wall thickness and specifications are guaranteed. The bed is tempered to eliminate stress to ensure accuracy and not deform (the tempered body has a dark red color). The fuselage is processed by the machining center, and the hole position machining center forms a hole.

Some other manufacturers: In order to reduce costs and improve competitiveness, manual tempering drills are not used for hole treatment.

2.Apex: The working table is a double-layer PVC adsorption table, and it is a high-quality PVC board produced using raw materials.

Other manufacturers: The working surface adopts single-layer adsorption, and PVC boards produced from recycled materials are used. 

3.Apex: The vacuum adsorption pipeline is made of high quality PVC rigid pipe, and the connection method is made of special PVC glue, which has been tested for air tightness. To ensure the stability of air source, air tightness and durability, it can ensure the stable working state for a long time.

Other manufacturers: The vacuum suction pipe is selected from ordinary hoses and cable ties, which cannot guarantee the stability, air tightness and durability of the gas source. The pressure loss for a period of time is large, and it cannot work stably.

4.Apex: All cylinders are equipped with a detection system to monitor the working condition of each cylinder if the cylinder is not working properly. The system will issue an alarm in time to remind the operator to check and troubleshoot in time to ensure the normal operation of the machine.

Other manufacturers: Do not install similar detection parts.

5.Apex: The reducer is the standard configuration of Qianjiang, and the brand chooses Shinpo of Japan. The equipment runs more stably, which helps to protect the motor and drive.

Other manufacturers: do not install reducer.

6.Apex: There are many pneumatic components in the equipment. Apex has installed air pressure stabilization devices in every important part. Ensure stable use of pneumatic components.

Other manufacturers: do not install such detection devices

7.Apex: All electrical components are made of genuine Schneider original parts.

Other manufacturers: Use other brands or non-original products. 

8.Apex: The cable is selected from Shanghai Yichu flex-resistant and flexible shielded cable. The cable shield shields external signals, and at the same time, no connector is allowed in the middle of the cable except for the device to ensure that the model is stable and free from interference. Anti-bending and high flexibility ensure that the cable will not break during use.

Other manufacturers: Use ordinary cables, no shielding layer, poor resistance to bending.

9,Apex: Products have been certified by SGS, have strict quality assurance system and management system, have strict quality testing methods and tools.

Other manufacturers: There is no management system and testing methods, and there is no testing standard for leaving the factory.

10.Apex: Every small part of the equipment is strictly tested, and high-quality parts are selected. For example, the limit block, soft limit switch, cylinder fixed seat, valve, etc. will be used in the equipment after repeated testing by Apex inspectors.

Other manufacturers: Small parts can be used if they are not used, and some simple and cheap parts with unstable performance are also used.