Настольный цифровой анализатор спектра XSA1015TG 9 кГц ~ 1 5

• 10.4 inches TFT LCD resolution 600*480
• Frequency Range from 9 kHz up to1.5 GHz
• 150dBm Displayed Average Noise Level
• 10Hz Minimum Resolution Bandwidth (RBW)
• EMI Pre-compliance Test Kit
• 1.5 GHz Tracking Generator Kit
• Standard Interface:USB HOST, USB DEVICE, LAN, Earphone Port and VGA

Frequency Specification 

Frequency Range:9kHz~1.5GHz
Frequency Resolution:1Hz
Frequency Span Range:0 Hz,100 Hz to maximum frequency of device
Reference Frequency:10.000000 MHz
Temperature Stability:<2.5ppm(15°C to 35°C)
Aging Rate:<1ppm/year
Marker Frequency Resolution:span/(the number of sweep points-1)
Frequency Counter Resolution:1Hz,10Hz,100Hz,1kHz
Resolution Bandwidth (-3 dB):1Hz to 500kHz(in 1 to 10 sequence),1MHz,3MHz
Resolution Filter Shape Factor:<5:1 nominal(Digital implement, similar to Gauss Pattern)
Bandwidth Accuracy:<5% nominal
Video Bandwidth (-3 dB):10Hz to 3MHz

Amplitude Specification 
Amplitude Measurement Range:DANL to +20 dBm,close the preamplifier
Reference Electric Level:-80dBm to +30dBm,0.1dBm steps
Preamplifier:20dB,nominal,9kHz~1.5GHz
Input Attenuator Range:0~39 Db,3dB steps
Max. Input DC Voltage:50 VDC
Max. Continuous Power:27dBm,average continuous power

Displayed Average Noise Level(DANL) (Input attenuation 0dB,1Hz resolution bandwidth)
Preamp Off :  1MHz~10 MHz -130dBm(nominated)
                       10MHz~1GHz -130dBm(nominated)
                       1GHz~1.5 GHz -128 dBm(nominated)
Preamp On:    1MHz~10 MHz -150dBm(nominated)
                       10MHz~1GHz -150dBm(nominated)
                       1GHz~1.5 GHz -148 dBm(nominated)

Phase Noise(20°C ~30°C,fc=1 GHz)
30kHz Offset:<-90 dBc/Hz
100kHz Offset:<-100 dBc/Hz
1MHz Offset:<-110 dBc/Hz

Level Display Range
Log Scale Coordinate:1dB ~255dB
Linear Scale Coordinate:0 to reference level
Level Unit:dBm,dBuW,dBpW,dBmV,dBuV, W,V
Points:201~1001
Number of Traces:5
Detectors:Positive-peak, negative-peak, sample, normal, RMS
Trace Functions:[1 ←→ 2],[2-DL→ 2] [2 ←→ 3] [1 → 3] [2 → 3]

Distortion and spurious response
Second Harmonic Distortion (SHI):fc ≥ 50 MHz,Preamp off,signal input -30dBm,0dB RF attenuation,20°C~30°C,-60dbc
Third-Order Intermodulation (TOI):fc ≥ 50 MHz,+13 dBm
1dB Gain Compression:fc ≥ 50 MHz,0dB RF attenuation,Preamp off,20°C ~30°C,+7 dBm, nominal
Residual Response:connect 50 Ω load at input port,0dB input attenuation,20°C~30°C,<-85dBm,nominated
Input Related Spurious:-30 dBm signal at input mixer,20°C ~30°C,<-60 dBc

Sweep Time and Triggering
Sweep Time Range (SPAN>0):10ms~3000s 
Sweep Time Range (SPAN=0):1ms~3000s
Mode:Continue, single
Trigger:Free run, video, external

Tracking Generator
Output Frequency Range:100 kHz~1.5 GHz
Output Power Level Range:-30 dBm~0 dBm
Output Power Level Resolution:1DB
Output Flatness:±3dB
Maximum Safe Reverse Level:Average total power:30dBm,DC:±50VDC

Inputs and Outputs
Front Panel RF Input Connector:50 Ω,N-type female
Front Panel Track Generator Output:50 Ω,N-type female
10M Reference Input:50 Ω,N-type female
Communication Port:USB HOST, USB DEVICE, LAN, Earphone Port and VGA

General Specification
Display:10.4 inches TFT LCD resolution 600*480
Working Temperature:0~40°C
Storage Temperature:-20°C~60°C
Power:100V~240V 50/60Hz
Weight:5kg

10 Hz Minimum Resolution Bandwidth (RBW)
Digital IF technology offers a minimum bandwidth of 10Hz,allowing excellent signal resolution when separation of closely spaced signals is required

Measure -130dB small signal at 10Hz RBW
Offers a DANL (displayed average noise level) down to -130 dBm, which is able to measure smaller signals

Phase noise:<-80 dBc/Hz @1 GHz @ 30 KHz offset
Excellent phase noise performance - <-80dBc/Hz @30KHz enables users to evaluate most synthesizers and signal generators

EMI filter and quasi-peak detector kit