Car Care Products Auto Detailing Surface Cleaning 200g Fine Grade Green Clay

Auto detailing clay is used to remove dust, dirt, industrial fallout, acid rain, and other contaminants from your car's exterior surfaces. Known as "claying," the process involves removing particles that stick to the clay when it is rubbed along the car's surface. Claying is most commonly used on paint, but also works on glass, fiberglass, and metal. When done properly, claying is non-abrasive and will not damage your car.

Steps:

1. Wash and dry your car thoroughly to remove as much of the dirt, grime, and other contaminants from the surface as possible.

2. Squeeze the clay in your hand until it becomes easily pliable.

3. Spray clay lubricant generously over the clay bar, Water will also work as a lubricant.

4. Slide the clay back and forth gently over the lubricated area using as little pressure as possible.

5. Add more lubricant if the clay sticks while you're trying to slide it or keep watering on the clay bar.

6. Fold the clay in half when it becomes dirty and knead it over itself until you have a clean surface.

7. Wipe the car using a clean microfiber towel.

8. Repeat the claying process, one section at a time, until the entire car has been clayed.

9. Apply a coat of wax or sealant, according to the instructions on the packaging, in order to protect the paint from corrosion that can form in the tiny holes that had been previously filled with contaminants before claying.

What Grade of Clay Bar Should I Use?
Fine clay bars tend to be the easiest to use simply because the clay is softer. Fine clay is great for a lightly contaminated finish, but not so great at removing things like sap and overspray. If you clay your car regularly, you shouldn't need anything more than a fine grade clay bar.

Medium clay is more aggressive than fine and will almost certainly microscopically mar the surface as you're claying because it weighs more. Medium clay, being more firm and dense, will remove stubborn debris and contaminants that fine clay cannot. For the most part, when you clay with a medium grade clay bar you should always polish afterward.

Heavy clay bars really aren't recommended unless you're dealing with overspray or other hard to remove contaminants. While heavy clay is often considered overly aggressive for clear coats, it is great on metal wheels and glass. Since these surfaces are much harder than your car's paintwork, clay works just as good without as much harm. When it comes to paint, just be sure you absolutely have to use the heavy grade bar by first trying medium or light clay to cure whatever is ailing your finish.

Clay Mitt

Clay Pad

Clay Pad

Car Towel

Car Mitt

Car Clay Bar

Car Brush

Wool Mitt

Wax Applicator

---specialized in designing manufacturering and marketing of microfiber products!
If there is any item you're particularly interested in, please feel free to contact us.
Miss June Zhang
TEL: +86-15267339968
Looking forward to your feedback and inquiry !