Лидер продаж вертикальная машина для волочения

Описание и отзывы

Трекер стоимости

Характеристики

vertical wire drawing machine

vertical wire drawing machine is appliable for high,medium and low carbon steel wire and alloy steel wire,Spring steel wire,Stainless steel wire.It is a very convenience step before drawing with features such as easy operation,high efficiency and low noise,etc.

 

Advantages of vertical wire drawing machine

 

1.Low noise,easy operation and high efficiency

2.High pay-off speed

3.No damage of wire surface and lubricant carrier

4. High safety standard against accidents

 

Main Usage of vertical wire drawing machine

 

The set of the machines is an ideal equipment for drawing wire stock of high,medium and carbon steel,as well as coper,alumium and alloy.The machine are applied for drawing wire in the factories,such as wire-steel factor,metal mesh factory and nail making factory etc.

 

In order to lower residual heat on the surface of the block, the cooling means is installed in inter-wall of the block,the wortle is soaked in cooling water to reduce its working temperature.

 

The machine runs with carvel or linkage. The safety halt gear is installed by the position of operating block.

 

Working process for vertical wire drawing machine

From here, I introduce one combination type wire drawing machine line. This production line input wire diameter: 5.5mm   output wire: 0.2mm

This production line have three working process, show as blow:

Sr.	Item	Unit
First process	Wire drawing machine	7set 1 gruop
Second process	Annealing Furnace	1 set
	Water tank drawing machine	1 set
Third process	AISI 304   JCJX-24B/A   wire drawing machine	1 set

 

 

First working process: vertical wire drawing machine

Twire drawing machine deal with steel wire, input steel wire is 5.5mm, output wire 1mm, this wire diameter reduction is 5.5mm-2.29mm is input diameter divide 1.16, get out put diameter

5.5--4.74--4.09--3.52--3.03--2.62--2.29mm              need 6 sets drawing baskets

If diameter small then 2.29mm, input diameter divide 1.14, get out put diameter

2.29-2m              need 1 set drawing basket          total is 7 sets drawing baskets

7 Sets Wire Drawing Machine Group
Speed:	240m/min
Mold price	10USD per pcs
Control	Two control box, one is frequency control, another one is operation control box, frequency control will save electricity
Baskets speed	135r/min
Capacity	Get 5 ton products/8hours
Weight	Total 14ton
Power	18.5+18.5+18.5+18.5+18.5+15kw
Total machine size	7.7*2.1*2.1m
Dia reducing process	5.5--4.74--4.09--3.52--3.03--2.62--2.29--2mm
Main machine structure	Casting materials
Start way	Soft start
Drive gear	Four gears  gear materials: No,45steel
Baskets materials	Cold, hard, alloy, need to maintain per three years
Drawing powder cost	1ton materials needs to cost 3kg powder
Remarks1	It could make the ribs by the machine directly, just make mold with ribs
Remarks2	The input size could be 5.5mm

 

 

 

The whole layout of vertical wire drawing machine

 

 

horizontal wire-drawing machine

 

vertical wire-drawing machine

 

Main spare parts of vertical wire drawing machine