Specifications

1. DC12V operate
2. 122cm size with black casing.
3. 4pin plug with 100cm 4 color wires
4. totally 48pcs Red &Yellow LEDs and 24pcs white LEDs, with running, reverse, left turn & right turn, brake fuction

Warning: The installation of this kit is recommended to be installed by a licensed professional. The improper installation of this kit will void all warranties.

Please read the following instructions thoroughly before installing this kit.

1. First using a tape measure, measure the lip under your trucks tailgate to ensure there is enough clearance to mount your tailgate light bar.

2. Following your trucks owner’s manual, carefully remove the tailgate from your truck.

3. Use the included 3M tape to temporarily mount the LED light bar to your trucks tailgate.

4. Using a 1/8th drill bit, pre drill the four mounting holes into your trucks tailgate, this will make the following step much easier.

5. Securely mount the tailgate light bar to your truck using a drill and the provided screws.

6. Run the power wire with flat 4 pin connector behind your bumper and to your trucks flat 4 pin connection. You may need to secure the slack in the wire so that it does not hang below the bumper.

If you purchased LED Tailgate Light Bar with Reverse Light Option proceed with your installation using the following steps:

1. Carefully remove one of your tail light assemblies.

2. Power your truck on and put it into reverse, so that your factory reverse lights are illuminated. It is imperative that you set the parking brake.

3. Return to the rear of your truck and remove the bulb from your reverse light.

4. Using a volt meter, find the positive 12 volt wire that powers your reverse light.

5. Once you have found your factory reverse light wire, use a wire stripper to cut and strip the wire.

6. Run the light bar’s white reverse wire to your factory reverse wire.

7. Use a butt connector to connect the tailgate bar’s white reverse wire to the trucks factory reverse wire. You can also solder or use a 3M™ Scotchlok™ type connector to secure this connection.

8. Now you can re-install your tail light assembly and tailgate, and test your tailgate light bar for full functionality.

Flat 4 Pin Connector Diagram:

A - Red Wire: Ground

B - White Wire: Running Lamp                 

C - Green Wire: Left Turn Signal

D - Black Wire: Right Turn Signal

R: Orange Wire : Reverse Wire-

E: Blake Wire - Brake Light

>>Click to get our samples

Shenzhen Kingshow Star Technology Co., Limited was established in shenzhen and our factory is located in Shenzhen, China. KingShow covers an area of 6,000 square meters and has about 400 employees, including 30 highly qualified staff members of specialists and engineers. We are a high-tech manufacturer specialized in led motorcycle light kit ,led auto/under light kit ,custom and normal LED strips, LED lamps, LED spotlights, LED bulbs, car lamps, wall washers, down lights, bedside lamps and other related LED products. Most of our products have CE and RoHS certificates. More than 90 percent of our products are delivered to Europe, North America and Australia.

>>Click to See More Product

King Show can satisfy your customized needs with our unparalleled advantages. We have been concentrating on the development, design and production of various electrical lighting appliances, such as automobile exquisite articles and colorful LED with professional technique, and we have been keeping good and direct business cooperation with the best LED chip suppliers in the USA and South Korea. Taking quality as priority, our QC staff members inspect all products piece by piece before delivery. Adequate tests must be conducted. We ensure that our products have good designs and top quality.

Our objective is to establish a long-term and steady relationship with you and we hope to become your reliable cooperative partner.Click to See Factory:https://kingshowlight.en.alibaba.com

Why choose us ?

1. Lowest Cost, from factory to buyer, we will help you to save the money.For the new client,we’d like to give you a preferential price for you. 

2. High Efficiency, Your inquiry will be replied in 24hours.Well-trained and experienced staffs to answer all your enquires in fluent English.

3. High quality, more than 10 years experience of producing makes us very professional in quality control, we promise the quality for each of our products.

4. Quick Delivery, Stock products will ship within 24 hours.Customized order will ship within 5 days.

5. Best service,Our factory can provide private custom service.The brands and logo can be customized. And distributor ship is offered for your unique design and some our current models.

6. Customers' Satisfaction,Protection of your sales area, ideas of design and all your private information.