Роскошные электрические раздвижные ворота со встроенным консольным

Описание и отзывы

Трекер стоимости

Характеристики

 

Features of Cantilever Sliding Gate:

• The cantilever sliding gate adopts high quality Al-alloyed material with elegant appearance and compact structure. The gate can be packed for whole-set packing or disassembled in groups for convenient transportation.


• Built-in powerful motor to make the sliding gate more beautiful and safer.


• The gate is suspension travelling, no need any rails, so it’s very easy and simple for installation and maintenance.


• Anti-Bumping Function: In the process of gate closing, if the smart infrared detector sensed people or obstacles, the electric gate will immediately go back and then stop automatically to assure of security.


• Anti-Crushing Function: In the process of gate travelling, if people or obstacles slightly contact the safety airbag mounted on both left and right sides of control box, and the pressure-wave sensor will transmit signal to the master control board to make the gate stop immediately.


• Anti-Climb-Over Alarming: The cantilever sliding gate is equipped with infrared detector to prevent climbing over, if the intelligent infrared detector sensed any people or obstacle, the alarm in control box will auto turn on for 10 seconds, and the alarm can be turned off by pressing stop-button or open-button on control box.


• If any emergency happed, you can press emergent ON/OFF button to cut off power and make the travelling gate stop immediately to assure of safety.


• Once the cantilever sliding gate motor temperature exceeds 120 degree or the gate is working for a limited time, then the motor will auto stop working for protection and prolong its life time.


• The gate is with clutch key and during the time of repairing, maintenance or power failure, you can open the gate clutch and then control the gate manually.


• The gate will be locked by turbine and worm in reduction gear box to make it not opened manually.


• The gate is with leakage protection to protect over voltage or current in control system to connect ground.


• The gate works smoothly, stable and quiet with high security, low noise, low failure rate and long service time.


• The gate is widely used in circumstances of -30℃ to +70℃ of high or low temperature, wind, rain, ice, snow, slope, over railway or track and even some other tough conditions.

 

Technical Parameters of Cantilever Sliding Gate:

Gate Height	1500mm-1800mm / Custom Height
Working Voltage	AC220V±10% 50Hz / AC110V±10% 60Hz (Custom)
Working Current	2Amp
Motor Power	400W
Motor Revs	1350r/min
Working Temperature	-35°c — +70°c
Travelling Speed	18mtr/min
Remote Control Distance	Less than 50m
Doorway Clear Length	Max. 13mtr
Working Noise	Less than 65db

 

 

 

Materials Specifications of Cantilever Sliding Gate:

Sliding Bar	Aluminum 269.5x172x8.0mm
Upper Beam	Aluminum 80x40x2.0mm
Gate Middle Pillar	Aluminum 80x80x2.0mm
Gate Grille	Zinc-Plated Panel with 1.2mm thickness
Back Pull Rod	SUS201 60x40x2.0mm
Twin Post	SUS201 100x100x2.0mm

 

 

 

 

We strictly obide by ISO9001:2008 quality management system in the whole process of ordering, production, QC, packing and delivery.

 

 

 

 

We can provide a corresponding side gate for pedestrain if it's required by your project, and the pedestrain gate will be attached with access card reader, auto door closer and electromagnetic lock.

 

 

We have a wide range of Cantilever Sliding Gate for any installation enviroment and requirement.