Алюминиевый Керамический нагревательный воспламенитель для горелки деревянных гранул

INNOVACERA® Ceramic hot surface igniters for pellet boilers only need approx. 1/10 of the energy of that needed by hot air fans and ignition blowers. Their ignition capacity lies between 120 and 350 W. Depending on the positioning of the ignition element in the boiler, the ignition time of approx. 60 seconds is extremely short. This also means minimal emissions.

Model No.

INCACH-R03

Dimension

78*OD10.5*ID6.5mm (Or Customized)

Voltage:

120V / 230V

Power:

160 W / 180 W / 210 W / 225 W / 230 W / 240 W / 255 W

Tube Size:

OD10.5 × ID6.5 × L90 mm

Power

150W

Supporting Socket:

NO.4 / NO.5 / NO.6 / NO.29

Lead wire:

300mm / 400mm / 500mm / 900mm (Customized is accept)

Range of temperature:

800~1100 °C

Package includes:

5 pcs

Applications:

Kerosene fan heater

Wood pellet, wood chips stove or boiler

Biomass Boiler

Furnace

Incense burner

etc...

Advantages

1) Higher temperature, about twice of traditional metal sheathed heater;

2) Shorter ignition time, about 60~90 seconds

3) Electrically insulated with no exposed electric contacts

4) Wear and corrosion resistance

5) Long life time

6) Easy to install and replace

Ceramic igniter technology benefits:

A fraction of the energy consumption compared to conventional cartridge or element heater.

Long-lasting (non-aging).

Time to ignition 60~90 seconds.

Tested to 100,000 cycles.

Easy to install and retrofit.

800~1100°C at steady-state temperature.

Impervious to oxidation and corrosion.

Ignite kerosene, wood chips, split logs, coal briquettes or other biomass, corn, etc.