CHARACTERISTICS & BENEFITS

-100% of efficacy in discharge capture.

-High level of protection.

-Electric continuity guaranteed. The device doesn’t offer any resistance to discharge conduction.

-Lightning rod without electrical components. Maxim durability guaranteed.

- OBVT-3 lightning rod preserves its initial properties after each discharge.

-Because it contains no electronic elements, there are no replaceable parts.

-It doesn’t need external power supply.

-Operation guaranteed in any atmospheric condition.

-the ball diameter is 23cm.

TECHNICAL SPECIFICATIONS

The capture terminal of OBVT-3 lightning rod fits the following technical specifications:

   -An electro atmospheric condenser.

   -An atmospheric accelerator.

-An insulation system

-An external structure made from stainless steel.

Its effective operaton in any atmospheric condition and environment.

INSTALLATION

The capture terminal of OBVT-3 lightning rod should take into account the following:

   -The point of the lightning rod should be situated, at lest two meters above the highest  building to be protected.

   -For its installation on a mast, the corresponding head-mast adapter is needed for the lightning rod.

   -The cabling of the covers should be protected against surges and connect to ground the metallic structures present within the safety zone.

   -The lightning rod should be connected to a grounding point by way of one of various conducting cables which will go down, whenever possible, the exterior of the construction with the shortest and straight possible trajectory.

   -The earth termination systems, whose resistance are not to surpass 10 ohms, should guarantee the most rapid possible dispersion of the lightning current dishcarge.