Главная
Все Категории
Прочие водостойкие материалы
Высокогибкий 2-компонентный модифицированный полимер гидроизоляционный шлам на основе цемента |

Высокогибкий 2-компонентный модифицированный полимер гидроизоляционный шлам на основе цемента |

Категория: Прочие водостойкие материалы >>>
Поставщик: ISOMAT,S.A.

Цена:109,40 ₽*

Количество:

Описание и отзывы

Трекер стоимости

Месяц	Минимальная цена	Макс. стоимость
Aug-17-2025	138.7 $*	141.57 $*
Jul-17-2025	112.45 $*	114.42 $*
Jun-17-2025	136.36 $*	139.8 $*
May-17-2025	135.67 $*	138.63 $*
Apr-17-2025	108.82 $*	110.56 $*
Mar-17-2025	133.97 $*	136.62 $*
Feb-17-2025	132.23 $*	135.38 $*
Jan-17-2025	131.64 $*	134.79 $*

Характеристики

Product Description

AQUAMAT-ELASTIC is a two-component, highly flexible, brushable waterproofing slurry consisting of a cement-based powder mortar (component A) and an emulsion resin (component B). After hardening, it forms a seamless, jointless membrane, with the following advantages:

• Crack-bridging ability.

• Total waterproofing against positive hydrostatic pressure up to 5 atm according to EN 12390-8. It can also withstand negative

• pressure.

• Vapor permeability.

• Suitability for potable water tanks, as well as food contact surface according to W-347.

• Resistance to UV radiation.

• Protection of concrete from carbonation.

• No corrosive effect on the reinforcing steel in concrete.

• Resistance to sewage water (sewage water treatment plants, sewers, etc.).

• Resistance to aging.

• Bonding to slightly wet surfaces without priming.

• Simple and low cost application.

• Suitability for green roofs, flower beds, etc., as it is certified as root-resistant.

• Also works as a radon barrier.

Certified according to EN 1504-2 and classified as coating for surface protection of concrete. Certificate No.: 2032-CPR-10.11.
Also certified according to ΕΝ 14891 and classified as liquid-applied, two-component, water-impermeable product CM O2P for
waterproofing under tiles, in external installations (walls and floors) and swimming pools. Certificate No.: 18/18172-2980 &
20/22565-1686, APPLUS Laboratories. CE marked.

AQUAMAT-ELASTIC has been tested by the accredited German Institute MFPA Leipzig and complies with the wet duty classifications A0 and B0 in accordance with the ZDB technical directive 2010 “Verbundabdichtungen” for waterproofing under plates and tiles in household wet areas, balconies and flat roofs. Certification No.: P-SAC 02/5.1/16-127 as waterproofing system under plates and tiles, P-SAC 02/5.1/16-129 as waterproofing systems for buildings.

Complies also with the requirements of the German building regulation DIN 18195-2 Tab. 7 & 8 (crack bridging, bonding, waterproofing, resistance to alkalis, etc.) for waterproofing under plates and tiles, as well as waterproofing of building structures. AQUAMAT-ELASTIC has been also tested and approved by the German Institute TÜV Rheinland LGA Bautechnick GmbH for being resistant, when in contact with sewage water.

It has also been tested and approved as a radon barrier by the Federal Budgetary Scientific Institution, Saint Petersburg Professor P.V. Ramzaev, Scientific Research Institute for Radiation Hygiene.

AQUAMAT-ELASTIC has been successfully tested by a third-party laboratory for resistance to root penetration, according to CEN/TS 14416:2014. AQUAMAT-ELASTIC has received an Environmental Product Declaration (EPD) following an assessment of its life-cycle environmental impacts. Registration No: S-P-06177, The International EPD® System.

Fields of Application

It is used for waterproofing surfaces made of concrete, plaster, bricks, cement blocks, terrazzo, gypsum boards, wood, metal, etc. Ideal in cases where high flexibility and good adhesion of the waterproofing layer are required.

Suitable for waterproofing substrates subject to expansion-contraction or vibration and show or are expected to show hairline cracks, such as flat roofs, balconies, above ground water tanks, swimming pools, inverted roofs, etc.

It can also be used for waterproofing basements, internally or externally, against moisture or water under pressure.

Color

Grey, White.

Consumption

Depending on the water load, minimum consumption and relevant thickness should be as follows:

Water load	Minimum consumption	Minimum thickness
Moisture	2.0 kg/m²	Approx. 1.5 mm
Water without pressure	3.0 kg/m²	Approx. 2.0 mm
Water under pressure	3.5-4.0 kg/m²	Approx. 2.5 mm

Packaging

• 35 kg packaging (25 kg cement-based powder mortar + 10 kg emulsion resin), in grey and white.

• 18 kg packaging (12.9 kg cement-based powder mortar + 5.1 kg emulsion resin), in white.

• 7 kg packaging (5 kg cement-based powder mortar + 2 kg emulsion resin), in white.

Shelf life – Storage

Component A:

12 months from production date if stored in original, unopened packaging in a frost-free and dry place.

Component B:

12 months from production date if stored in original, unopened packaging, at temperatures between +5°C and +35°C. Protect from direct sunlight and frost.

Certificates

CE | EN 1504-2 C

CE | ΕΝ 14891 CM O2P

Certified according to EN 1504-2 and classified as coating for surface protection of concrete. Certificate No.: 2032-CPR-10.11.

Also certified according to ΕΝ 14891 and classified as liquid-applied, two-component, water-impermeable product CM O2P for waterproofing under tiles, in external installations (walls and floors) and swimming pools. Certificate No.: 18/18172-2980 & 20/22565-1686, APPLUS Laboratories. CE marked.

P-SAC 02/5.1/19-008

P-SAC 02/5.1/16-129

Certified as root-resistant, according to UNE CEN/TS 14416 EX: 2014

AQUAMAT-ELASTIC has been also tested and approved by the German Institute TÜV Rheinland LGA Bautechnick GmbH for being resistant, when in contact with sewage water.

It has also been tested and approved as a radon barrier by the Federal Budgetary Scientific Institution, Saint Petersburg Professor P.V. Ramzaev, Scientific Research Institute for Radiation Hygiene.

About Us

ISOMAT is a Greek multinational Group specializing in the development and manufacture of building chemicals, mortars and paints. For over 40 years, ISOMAT has been making a history of quality, reliability, deep expertise and continuous business growth. It has three production units; one in the parent company in Greece and two in its subsidiaries in Romania and Serbia. In addition, it has 5 commercial subsidiaries in Germany, Russia, Turkey, Bulgaria, and Slovenia and exports to over 80 countries worldwide.

ISOMAT has developed integrated solutions for both large and small construction projects through its wide portfolio of more than 350 high-quality products falling into the following 8 product categories:

1. Waterproofing
2. External Thermal Insulation
3. Paints & Surface Protection
4. Tile & Natural Stone Installation
5. Concrete Admixtures & Repair Products
6. Masonry Construction & Repair
7. Industrial floorings
8. Microcement Coatings & Decorative Floorings

Committed to continuously developing new, pioneering, user-and environment-friendly products, ISOMAT owns a fully organized R&D department consisting of 7 chemistry R&D labs and 3 Quality Control labs (in Greece and its 2 subsidiaries in Serbia and Romania) staffed by highly qualified experts. Their mission is to continuously optimize existing products and develop a number of new, innovative, high-performing products every year in keeping pace with the ever-increasing market needs and technological advancements in the construction industry.