LS129-UVALED УФ-Тест цифровой зонд в реальном времени стандарт температуры мощности RS485 MODBUS поддержка ПЛК

Описание и отзывы

Трекер стоимости

Характеристики

LS129-UVALED UV Digital Probe test real-time power temperature Standard RS485 MODBUS support PLC human-computer interfaceI

LS129 is a small and intelligent communication UV digital probe. It is suitable for various measurement occasions that need to detect UV power and energy in real time. The digital probe has a standard RS485 communication interface and supports MODBUS communication protocol. Its detector and controller are separate which is easy to installation and can be directly connected to a computer, PLC and human-machine interfaceI for communication in order to realize real-time data acquisition and monitoring.

Probe Parameter

Depending on the UV spectrum range and application industry, Linshang has launched three different UV digital probes to choose from, namely LS129-UVALED, LS129-UVA and LS129-UVC. The following table shows the relevant parameters of the three digital probes.

 

Probe Model	LS129-UVALED	LS129-UVA	LS129-UVC
Spectral response	340nm-420nm, calibrated at 395nm	315nm-400nm, λp =365nm	230nm-280nm, λp =254nm
Power measurement range	0-20000mW/cm2	0-2000mW/cm2	0-20000μW/cm2
Energy measurement range	0 - 4 × 109 mJ/cm2		0 - 4 × 109 μJ/cm2
Resolution	1mW/cm2	0.1mW/cm2	1μW/cm2
Measurement accuracy	±10 %
Sampling speed	2048times/s
Data fresh cycle	200ms
Test light hole diameter	10mm
Communication line length	1m, resistant to high temperature of 200℃
Detector line length	0.5m, resistant to high temperature of 200℃		Integrated
Communication interface	RS485
Communication protocol	MODBUS
Supply voltage	DC 5V-24V 20mA
Operation temperature	-25℃- 85℃ (Humidity less than 85%, no condensation)
Controller size	72.5*32*15.1(mm)
Probe size	35*15*14.5(mm)		35*23*16.7(mm)

Communication Parameters

1. Station No

The LS129 smart digital probe supports the standard MODBUS protocol. The default communication address is "1". You can modify the probe communication address through the "Human Machine Debugging Tool" or the communication protocol. The address setting range is 1-247.

2. Baud rate

The default baud rate of the UV digital probe is 9600bps. The baud rate can be modified through the "Human Machine Debugging Tool" or communication protocol.

3. Protocol

Supports the standard MODBUS protocol. You can read the measurement data, set the communication address and baud rate through the communication protocol. For detailed communication commands, please refer to "LS129 Digital Probe Communication Protocol".

4. Probe wiring

Wire color	Function
Black (with heat-shrinkabletube)	Shielded wire
Red	Positive power(DC 5-24V)
Black	Negative power
Green	RS485-
White	RS485+

 

 

Feature

Adopt RS485 communication interface, Support MODBUS communication protocol

This UV intensity probe adopts standard RS485 communication interface and MODBUS communication protocol. It is equipped with high temperature wire capable of withstanding temperature of 200 ℃, which can realize online monitoring in real time for a long time

 

 

 

Whole probe is exquisite and compact, Detector and controller is seperate

The LS129 UV digital probe has a very small size, and the detector and controller adopt a split design, which is very convenient for installation where measurement is needed. It is also possible to combine the detector and controller with screws for measurement

Ultra-wide power supply range

The probe is powered by a 5-24V ultra-wide DC power supply range, which is very convenient for use in different industries on spot

Free computer debugging software for communication protocol debugging.

There are two kinds of RS485 negative communication cable in green and blue, please refer to the actual color of the received goods

Debugging tools

Human Machine Interface for commissioning

 

It can be used to view test data, set probe address and baud rate during debugging

RS232/RS485 converter

Used for communication protocol debugging

USB adapter

used to read data from RS485 to USB connection computer