UK Firstlight и Heraeus 300 000-400 000 снимков IPL Лазерная ксеноновая

Xenon lamp, as a common light source of laser equipment, is often called laser xenon lamp and pulsed xenon lamp. Xenon lamp is a phototube or flash lamp filled with xenon gas. Xenon gasification is not active, can not be burned, nor is it combustion-supporting. It is a natural rare gas with high molecular weight and density. Xenon high-pressure lamp emits strong ultraviolet radiation, which can be used in medical treatment, spectroscopy and various industrial laser equipment.

Matters needing attention:
1. Do not stain quartz bubble shell should be kept clean, use alcohol cotton wipe before use and then light.
2. Because of the high current, the contact between lamp holder and lamp holder must be good, and the contact point must be kept clean in use.
3. Because the lamp is filled with high pressure gas, collision should be avoided during loading and unloading, especially during loading. When working, the lamp should be placed in a well-radiated hood to prevent explosion, strong light and strong ultraviolet rays from burning skin and eyes.
4. Xenon lamp must be used with special DC power supply and trigger. The ripple coefficient of DC power supply should not exceed 7%, and the working current should be within the specified range when ignited. Otherwise, it will affect the life of the lamp, or even destroy it.

Pulsed xenon lamp is a vulnerable part of laser equipment. In order to ensure the normal operation and production efficiency of this function, it must be replaced when the energy decreases.
Laser welding, cutting equipment lamp replacement precautions!
Due to the low strength of the sealing transition glasses at both ends of all lamps, special care should be taken when replacing the glasses which are easy to be damaged. The steps are as follows:
1. Shut down, shut down water, and release the residual charge on the energy storage capacitor;
2. Remove the lamp electrode;
3. Remove the lamp cover and carefully pull out the lamp from the side of the full mirror.
4. Clean the casing with cotton-stained cleaning solution.
5. Check whether the appearance and size of the new light meet the requirements.
6. Install the lamp into the chamber, press the cover and install the electrode.
7. Check the sealing condition of each part through water.
8. Turn on the main power supply to check whether the lamp can discharge normally.
9. Single-point operation, check whether the laser output energy meets the requirements, if the output is not ideal, the resonator needs to be adjusted repeatedly;
10. Cover the laser cover.

DCT Industry is a supplier and manufacturer of laser crystals, optics, and laser components. Wide range of products orientated for photonics is available. Our products are used in laser systems and applications in fields of industry, military, scientific research and aero-space all over the world. Diverse shaping of crystals, lenses, windows and other photonics products are available upon individual customer request. Our customer-orientated services are able to offer everything necessary for photonics.

OUR MISSION
To maintain excellent quality and client-orientated service.

OUR VISION
To become a leading company in photonics components supply.

OUR GOALS
– To set the highest standards of customer satisfaction
– To be the most recommended company in our field