Генератор электроэнергии на биомассе древесный чип Электрогенератор syn генератор 50 кВт

Описание и отзывы

Трекер стоимости

Характеристики

rice husk gasification Power generation system Biomass gasifier for generator Biomass Power Plant

The Biomass gasifier Adopts down draught stalk producer is a small gasifier that uses crop straw and other agricultural wastes to make straw gases. It is a great product that utilizes the stalk gasification pyrogenation technology to produce environmentally friendly gases using common biological materials such as straw. It serves as a solution to environment pollution caused by destroying straw on fire and save trees by replacing them by straws. Thus, it protects environment, saves energy sources and improves the life quality of farmers.

Biomass gasification power generation equipment mainly consists of biomass pyrolysis gasifier and syngas power generation equipment, supplemented by shredding equipment and drum drying equipment. The whole set of equipment adopts modular design, which is convenient for transportation and installation; the biomass gasifier adopts downdraft, fluidized bed and dry purification technology, so that biomass can be fully pyrolyzed, and secondary water pollution to the natural environment can be avoided; PLC automatic control system is used to realize automatic operation of the equipment, which does not need a lot of manual operation, and saves labor; the synthesis gas generator group control The control module adopts the control technology of generator set with microprocessor as the core, which has many functions such as automatic data recording, automatic operation, automatic control, automatic protection, etc., and has good reliability and stability. The operation parameters of the unit are displayed by large screen liquid crystal, which shows large and accurate data. The project covers a small area and does not need to expropriate too much land resources. In addition, biomass gasification power generation technology has no problem of waste water and waste smoke emission. The derived products of biomass oil (TAR), wood vinegar and biomass carbon can be extracted, processed and reused in various industries, so as to maximize the resource utilization of agricultural and forestry wastes.

 

Biomass & Waster can be Used In B iomass Gasification System

Gasification Principle

 

 

 

Generation principle of biomass syngas: biomass raw material enters the reactor of gasifier, is heated and dried, and then with the temperature rising, its volatile matters are separated out and pyrolyzed (cracked) at high temperature. The pyrolyzed gas and biomass react with the air supplied in the oxidation zone to generate CO2 and water vapor. The heat generated by combustion is used to maintain drying, pyrolysis and lower part Endothermic reaction in the original region. The gas generated after combustion reacts with high temperature carbon layer through reduction zone (c + CO2 = 2CO, C + HO2 = H2 + CO) to generate biomass synthesis gas containing Co, H2, CH4, CMHN and other components, which is led out from the lower part and sent out for use after removing impurities such as tar through purification system. The ash is discharged from the lower part of the gasifier.

 

Model	Gas output	Gas calorific value	Efficiency of gasification	Draught fan Power	Material amount	REMARK
PM-10D	5-10m3/h	4600-5200KJ/m3	>72%	220V/50HZ	3-5KG/H	Not suitable fixed generator
PM-10A	5-10m3/h	4600-5200KJ/m3	>72%	220V/50HZ	3-5kg/h	Not suitable fixed generator
PM-20A	15-20m3/h	4600-5200KJ/m3	>72%	220V/50HZ	8-10KG/H	Fluidised bed 5kw generator
PM-30A	25-30m3/h	4600-5200KJ/m3	>72%	220V/50HZ	15-18Kg/h	Fluidised bed 10kw generator
PM-50B	50m3/h	4600-5200KJ/m3	>72%	220V 380V	25-30Kg/h	Fluidised bed 15-20kw generator
PM-100B	100m3/h	4600-5200KJ/m3	>72%	220V 380V	50-60Kg/h	Fluidised bed 30kw generator
PM-150B	150 m3/h	4600-5200KJ/m3	>72%	220V 380V	70-90Kg/h	Fluidised bed 50-60KW generator
PM-200B	200 m3/h	4600-5200KJ/m3	>72%	220V 380V	100-120Kg/h	Fluidised bed 60-70KW generator
PM-300B	300 m3/h	4600-5200KJ/m3	>72%	220V 380V	150-160Kg/h	Fluidised bed 100-110KW generator

 

 

  Our biomass Gasification process includes three steps. The first step is gasification, which convert biomass into syngas. The second step is syngas purification. The producer gas coming from gasifier usually contains contamination including dust, coke, tar and etc. The contaminants will be removed by the purification system to ensure normal operation of gas engine. The third step is power generating in gas engine. The high temperature waster exhaust gas may be reused by heat boiler to generate steam or hot water for civil or industrial use.

 

Gasification Data of Several Raw Materials

No.	Material Name	Consumption of Raw Materials (kg/kWh)	Raw Material Gas Production (Nm3/kg)
1	Rice Husk	1.6-1.8	1.6-2.2
2	Rice Straw	1.6-1.7	1.6-2.3
3	Sawdust	1.4-1.5	1.9-2.4
4	Woodchips	1.3-1.5	1.9-2.3
5	Coconut Shell	1.5-1.8	1.5-2.0
6	Palm Kernel Shell	1.5-1.6	1.5-2.1