Оптовая продажа с фабрики электрический школьный ластик 2 в 1 Электрический Пылесос

Описание и отзывы

Трекер стоимости

Характеристики

Factory wholesale Electric school eraser 2 in 1 Electric Vacuum Cleaner Eraser for classroom

 

1. Electric Eraser

 Move the eraser mouth to where you want to erase

 Simply press the “Wipe” button and gently touch to remove the mark

NOTE:

 It is recommended to tilt the wiper within 80 degrees instead of perpendicular to the paper.

Please do not press hard when erasing, otherwise it will get stuck.

When the battery voltage drops, the eraser power may decrease. So you should keep the eraser full of power.

 

2. Electric Vacuum Cleaner

Method 1 (Vacuum):

A. Pull out the top cover

B. Move the suction port to the place you want to clean.

C. Press the “Vacuum” button to remove dust, rubber scraps, paper dust, lint, cat hair, apple seeds, sand on the window sill, etc.

Method 1 (Sweep):

A. Open the top cover

B. With a brush near the air inlet

C. Clear the attached tight dust

D. Dust, debris, etc. can be used as a small garbage storage device by brushing directly onto the cover with a brush.

 

3. Easy to Remove and Replace Eraser Refills

A. Correctly install two triple A batteries;

B. Pinch the eraser head (metal clip)

C. Gently pull out and the eraser pulls out about 3mm

D. Replace the eraser refills

E. Put the metal clip into the rubber body

 

4. Cleaning Dust Box

A. Unscrew the cover counterclockwise and remove it

B. Clean up the trash can

C. Use a brush or paper to remove dust, debris or debris from the bin.

D. Can clean the filter and dust box with water

 

Product Development Background:

The electric eraser with vacuum cleaner function can automatically clean off the rubber scrap left after wiping, and even clean the dust on the desktop, keyboard gap and so on. A brush is placed near the air inlet to remove the tight dust. The dust storage cover and the body are fast-rotating and locking structure. When the dust is full, the dust can be disassembled and poured into the trash can. The filter can also be cleaned with water. This solves the problem that the existing electric eraser only wipes and wipes. After the completion of the rubber can not be cleaned up.

Nowadays, the electric eraser on the market only has the wiping function. After the wiping, the eraser cannot be cleaned, or it needs to be cleaned by hand. It is not environmentally friendly, and most erasers need to be manually wiped, which is not convenient for people to use. It’s a problem.