Транспортное средство скорой помощи

Reasonable design: A number of high-strength steel reinforcement beams are carefully designed on the top of the carriage and the side of the body to fully ensure the body strength of the ambulance. After the ambulance is strengthened as a complete vehicle, we use a green and environmentally friendly foaming agent to foam the vehicle. The foamed body has the functions of heat insulation, sound insulation, sound absorption and noise reduction, which can improve the operating efficiency of the air conditioner and fully meet the environmental requirements of the medical cabin.

Pre-embedded bottom plate: In order to prevent the bottom plate of the vehicle from being penetrated when installing the seat and stretcher, the interior of the ambulance body we produce basically adopts the pre-embedded steel plate in the floor and side wall along the longitudinal direction of the body, and then installs the seat and stretcher cabin. Cabinet. When the car body is installed, holes can be directly drilled on the embedded steel plate, and the seat and stretcher are fixed directly with the embedded steel plate inside the car body with bolts instead of piercing the original car floor, which can effectively prevent rainwater from affecting the bottom plank of the ambulance. However, many small factories do not install pre-embedded steel plates and directly punch holes on the original car floor. Over time, water will seep from the bottom, causing the floor to corrode and damage the floor in the short term.

Wiring harness: The wiring harness used in the modification of the ambulance adopts the locking wiring harness and connectors customized by the original supplier system, which can effectively prevent poor contact, signal interference and spontaneous combustion. Adopt automobile low-voltage wire harness: it conforms to the national automobile industry standard wire, and can reach the whole vehicle wiring harness standard. All connections use special automobile connectors, and there is no household plastic-covered wire.

The shipping methods include: Ro-Ro, bulk shipping, 20ft container, 40ft container, 40HQ container, flat rack container, open top, platform container, express, etc. 

Itruck is a global leading special purpose vehicle manufacturer, located in center of China – Suizhou city, Hubei Province. It covers an area of 670,000 square meters, with over 800 workers and 80 technical engineers.

Over 10 years, Itruck has dedicated to special vehicles manufacturing and accumulated lots of experience on special vehicles’ manufacturing and management. Itruck products cover tanker series, sanitary series, garbage truck series, civic utility series, construction series, semi-trailer series, buses, caravans, etc., widely

used in environment and sanitation, virescence, architecture, transportation, oil mining and many other fields.

Itruck vehicles have been shipped to:

Asia: Myanmar, Vietnam, Cambodia, Sri Lanka, Philippines, Pakistan, Indonesia, Bangladesh, Afghanistan,

Mongolia, Laos, Armenia, Uzbekistan, Kazakhstan, Kirgizstan......

Africa: Malawi,CapeVerde,Malawi,Somalia,Angola,Nigeria,Ghana,Gambia,SierraLeone,Guinea,Mali,

Chad, Algeria, Egypt, Ethiopia, South Sudan, Tanzania, Zambia, Mozambique, South Africa, Botswana,

Morocco, Congo, Congo(K), ......

Europe: Gibraltar, Moldova, Albania......

Middle East: Jordan, Iraq, Qatar, Lebanon, UAE......

Oceania: PNG, Palau, Cook Islands......

Latin America: Saint Kitts and Nevis, Chile, Venezuela, Panama, Colombia, Peru, Bolivia, Uruguay, Trinidad & Tobago.

1. who are we?
We are based in Suizhou, China, start from 2005, sell to Africa(80.00%), Southeast Asia(10.00%),South America(5.00%),Mid East(2.00%),Oceania(2.00%),Eastern Asia(1.00%). There are total about 11-50 people in our office.

2. how can we guarantee quality?
Always a pre-production sample before mass production; Always final Inspection before shipment;

3.what can you buy from us?
Truck,Trailer,Truck Parts,Trailer Parts,Tank

4. why should you buy from us not from other suppliers?
Launched in 2005, we are the leading company for truck and machinery business.We are the top brand of Chinese Truck Exporting. We serve trucks ,truck parts and machinery around the world.

5. what services can we provide?
Accepted Delivery Terms: FOB,CFR,CIF,EXW,CIP,DDU;
Accepted Payment Currency:USD,EUR,CNY;
Accepted Payment Type: T/T,L/C,D/P D/A,MoneyGram,PayPal,Western Union,Cash;
Language Spoken:English,French

Alex Zhang
Sales Manager
Hubei iTruck Import & Export Trading Co., Ltd
Mobile/WhatsApp/WeChat: 0086-19947597881

Address of Foreign Trade Department: Room 4 & 5 (-103), 17th floor, Building 10, Greenland Guobo Square, No. 111, Sixing North Road, Hanyang District, Wuhan City
Address of Factory: Xiguang Industry Park, Zengdu District, Suizhou City, Hubei Province, China