Угол обшивки 3 м

Описание и отзывы

Трекер стоимости

Характеристики

Render Angle Bead 3m Galvanised

Aluminium Angle Bead ismade of Grade 3003 raw material.This material is very popular in the Australian market .The wing is 32mm. It has a smooth round nose bead with diamond mesh wings for the keying of plaster right up to the nose of the bead. On the outside is the finished edge which is where one side of your drywall knife runs on when you are applying drywall mud. The two flanges sit flat on your raw drywall. The diamond decoration along the length of the flange act as a keyway for holding the drywall mud to the drywall and the corner. This mesh insures a perfect bond and provides effective reinforcement where most needed. Straight edge nose is easy to install and permits plumb straight outside corners. Excellent protection for corridor corners exposed to traffic.

 

There are two kinds of edges: One is with edges, edge width 5mm-10mm, another is without edges

 

Thickness	Length	Aperture	Width	Material	PCS/CTN
0.3mm	2.4m-3m	5x15mm	30mm	Alu/SS/Gal.	50-100
0.4mm	2.4m-3m	10x20mm	32mm	Alu/SS/Gal.	50-100
0.45mm	2.4m-3m	10x20mm	50mm	Alu/SS/Gal.	50-100
0.5mm	10	10x30mm	60mm	Alu/SS/Gal.	50-100

 

1, Corner bead is made of high quality galvanized/Aluminum/Stainless Steel material on both sides, which can be anti aging, corrosion resistant, prevent rust.

2, Corner bead behave precise angle size design, to avoid the impact of the corner concentrated force, The external force evenly dispersed to the surrounding edge, effectively protect the integrity of the yang angle

3. Corner bead was divided with perforated corner bead and expanded corner bead, which is not only convenient nail and the gypsum board bead and corner parts or other adhesive materials with more solid

4. Corner bead construction without relying on wooden board, the primary plasterer can also make a perfect line, shorten the construction time, reduce the construction cost

1. Our company produce various specifications, models as per standards

2. Using high-quality material and advanced production technology and equipment for processing

3. Applicable to a humid climate and the harsh corrosive environment

4. Products has been exported to Europe, North American, the Middle East, South East Asia, Africa, Asia, European, other countries and regions